Turck M12 adapters
26 July, 2010 | Turck Australia Pty Ltd
Turck has introduced M12 adapters that may be used to connect incompatible round connectors quickly and easily. These compact connectors can be used instead of reordering cables or adding junction boxes, saving installation time and equipment costs while consuming minimal storage space.
Turck M12 true torque connectors
20 July, 2010 | Turck Australia Pty Ltd
Turck has introduced M12 true torque connectors that can be hand-tightened to a predefined torque, preventing overtightening. Once the correct torque has been achieved, the nut rotates freely - indicated by a clear haptic and audible signal.
Turck Cat5e ethernet cables
21 June, 2010 | Turck Australia Pty Ltd
Turck has announced Cat5e ethernet cables that are gigabit capable and incorporate flexlife cable jackets. This jacket material is resistant to abrasion, crushing forces and chemicals, making it suitable for harsh-duty environments.
Turck BIM-UNR, BIM-UNT and Q-pak sensors with WeldGuard
21 June, 2010 | Turck Australia Pty Ltd
Turck has announced that its BIM-UNR, BIM-UNT and Q-pak sensors are now equipped with WeldGuard protection, making them impervious to weld slag and spatter often present in MIG and TIG welding environments. The protective material has been applied to these compact, rectangular sensors’ faces and protective sleeves are also available to protect the attached connector and cordset.
Turck single axis MEMS inclinometer sensor
25 May, 2010 | Turck Australia Pty Ltd
Turck has introduced a single-axis inclinometer sensor for detecting angular tilt with an adjustable measuring range of 360°. Inclinometer sensors solve unique feedback requirements for applications such as levelling platforms, controlling a dancer or controlling tilt angle in a diverse array of industries.
Turck IM21 rotational speed interface module
17 May, 2010 | Turck Australia Pty Ltd
Turck has enhanced its interface module (IM) family with the FM approved IM21 rotational speed interface module, programmable via push-buttons or using a PC - which simplifies device set-up and saves installation time. The modules employ FDT/DTM software, together with PACTware, enabling users to efficiently set and save multiple application parameters.
Turck Interface and Intrinsic Safety Quick Reference Guide
17 May, 2010 | Turck Australia Pty Ltd
Turck has released its Interface and Intrinsic Safety Quick Reference Guide, providing an overview of the company’s intrinsically safe products, including switching amplifiers, analog I/O, solenoid drivers, rotational speed monitors, and relay and power supplies. The guide also features new intrinsically safe models, such as FDT/DTM amplifiers that can be programmed with PACTware.
Turck PB-XEPI Ethernet/Profibus device coupler
20 April, 2010 | Turck Australia Pty Ltd
The PB-XEPI Ethernet/Profibus device coupler combines integrated web server software with diagnostic functionality, to enable users to monitor Profibus networks remotely through a web browser, without disrupting network operations. The PB-XEPI may be integrated into new or existing Profibus networks in pharmaceutical, food and beverage, and packaging applications.
Turck industrial ethernet switches
20 April, 2010 | Turck Australia Pty Ltd
Turck’s line of rugged, harsh-duty ethernet switches has been updated to include unmanaged models that will support either 4- or 8-pin M12 twisted pair cable, as well as 4- and 5-pin 7/8-16UN power cable. The 4-pin switch is suitable for EtherNet/IP applications with both managed and unmanaged options, while the 8-pin switch is suitable for standard ethernet applications.
Turck LI-Q25 series linear position sensors
20 April, 2010 | Turck Australia Pty Ltd
The LI-Q25 series linear position sensors are designed to replace magnetostrictive and potentiometer devices to deliver precise, repeatable measurements in metal processing machines, rolling mills or injection moulding machines.
Turck explosion-proof minifast receptacles
08 April, 2010 | Turck Australia Pty Ltd
Turck has announced 1″-16UN and 1-1/8″-16UN minifast explosion-proof, feed-through receptacles, which install directly into standard 3/4″ conduit entries without requiring additional conduit or poured seals. These quick-disconnect B-size (1″) and C-size (1-1/8″) receptacles expedite installation while maintaining the explosion-proof ratings of instrument housings and explosion-proof enclosures in Class I, Division 2 hazardous areas.
Turck BIM-UNR position sensors for C-groove cylinders
08 April, 2010 | Turck Australia Pty Ltd
The BIM-UNR line of compact magnetic cylinder position sensors now includes a dual sensor designed for detecting short and long stroke C-groove cylinders. BIM-UNR dual sensors combine two sensors through one cable connection to speed installation, as well as lessen wire costs and connection points. This design makes the sensor beneficial in areas where multiple cylinders are used, as it only requires a single cable. With dimensions of 2.9 x 4.6 x 18 mm, the sensors feature a low profile.
Turck IMS interface modules
08 April, 2010 | Turck Australia Pty Ltd
Turck has announced that its IMS interface modules are now UL certified for Class I, Division 2, Groups A, B, C and D hazardous locations. The 6.2 mm wide IMS modules provide complete galvanic isolation, resisting electrical interference and noise in busy plant environments, with signal conditioning for new or retrofit hazardous area installations.
Turck single-segment redundant backplane
10 March, 2010 | Turck Australia Pty Ltd
Turck has expanded its diagnostic power conditioner system with a single-segment redundant backplane that can combine two isolated power supply modules into one FOUNDATION fieldbus segment. The backplane includes an integrated diagnostic unit used to monitor the redundancy of the external bulk power supply along with the H1 power supply - aiding in the availability of the H1 segment. System status is available via a relay contact.
Turck BIM-UNR miniature magnetic cylinder position sensor
10 March, 2010 | Turck Australia Pty Ltd
The BIM-UNR is a miniature magnetic cylinder position sensor designed to mount within C-groove cylinders with no accessories required. Its dimensions are 2.9 x 4.6 x 18 mm.
