Turck BIM-UNR sensors with NPN output

Friday, 17 September, 2010 | Supplied by: Turck Australia Pty Ltd


The BIM-UNR magnetic cylinder position sensor range has been expanded to include sensors with NPN outputs.

BIM-UNR sensors are also now enhanced with a combination mounting screw that gives users the flexibility of choosing a 1.3 mm allen key or a flat-bladed screwdriver for sensor installation. Sensors can be securely mounted with a simple quarter turn of the mounting screw, which is located in close proximity to the cable exit. This design ensures the sensors remain firmly fastened, even if a cable is pulled.

With dimensions of 2.9 by 4.6 by 18 mm, the sensor can be inserted into a C-groove from the top rather than from the side. The sensor’s active sensing element is placed at the bottom of the groove - as close to the magnet as feasible - to deliver reliable detection, particularly on short-stroke cylinders. In addition, the sensor provides high immunity to EMC interference, in accordance with EN 60947-5-2.

Online: www.turck.com.au/en
Phone: 1300 132 566
Related Products

Siemens mobile drive platform

Siemens is expanding its drive portfolio for mobile ELV applications with the introduction of the...

Rockwell Automation CompactLogix 5390 controller

Rockwell Automation recently launched its CompactLogix 5390 controller, the latest in its...

AutomationDirect Productivity1000 Mini PLCs

The Productivity1000 Mini PLCs are standalone models in the AutomationDirect Productivity range,...


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd