DeviceNet gateway
14 March, 2009 | Turck Australia Pty Ltd
Turck has expanded its line of BL20 economy modules with the release of a DeviceNet gateway. This addition augments Turck’s current PROFIBUS-DP and CANopen gateways for the BL20 economy system.
19-pin connectors
13 March, 2009 | Turck Australia Pty Ltd
Turck has expanded its 28.6 mm minifast connector line with the addition of the 19-pin connector. The 19-pin minifast connector is rated for up to 300 V, 4 A per pin, and is a solution for applications requiring an even more robust, cost-effective solution than a traditional 19-pin M23 connector — including material handling in manufacturing and packaging applications.
Magnetic cylinder position sensor
12 March, 2009 | Turck Australia Pty Ltd
Turck has added a compact WIM45 magnetic field sensor to its line of cylinder position sensors. The WIM45 provides a direct analog output for determining the position of a piston magnet on all types of pneumatic cylinders, delivering greater accuracy than indirect analog monitoring with potentiometers or linear position systems.
Dual-axis MEMS inclinometer
01 December, 2008 | Turck Australia Pty Ltd
Turck has introduced a dual-axis inclinometer sensor for angular tilt detection.
Wiring system
01 December, 2008 | Turck Australia Pty Ltd
Turck has announced the M16 powerfast wiring system for machine power distribution and motor control.
Turck instrumentation enclosures
01 November, 2008 | Turck Australia Pty Ltd
Turck’s BL20 motor starter economy module utilises SWIRE technology to provide daisy-chain connection from a single I/O slice to each motor starter via a ribbon cable.
Moulded cordsets
05 October, 2008 | Turck Australia Pty Ltd
Turck now has the ability to mould its 6- and 8-pin M23 powerfast connectors. These connectors may also be completely shielded by connecting a braided shield directly to the coupling nuts.
Plastic detecting sensors
05 October, 2008 | Turck Australia Pty Ltd
Turck has introduced the BCC capacitive sensor series, specifically designed to provide accurate level detection in the plastics industry. The BCC series features good EMC and ESD immunity, allowing the sensors to reliably detect the level of plastic pellets in a hopper while withstanding environmental interference.
Weld nut sensors
05 October, 2008 | Turck Australia Pty Ltd
Turck has introduced magnetic-inductive sensors for efficient and economic detection of weld nuts. These sensors use signal attenuation to reliably detect ferromagnetic components such as nuts, bushings and spacer sleeves and ensure these necessary components are present before robotic welding occurs — with no additional software or electronics required.
Analog interface modules
05 September, 2008 | Turck Australia Pty Ltd
Turck has introduced the IMS interface module, designed to provide a cost-effective solution for analog signal conversion. The IMS interface module measures 6.2 mm wide, featuring one of the smallest profiles on the market today.
Hazardous area pressure sensor
08 July, 2008 | Turck Australia Pty Ltd
Turck has expanded its line of pressure sensors to include a specialty sensor for hazardous areas. The PT4300 is a media isolated stainless steel pressure sensor for use in oil and gas, refrigeration, gas compression, test stands and industrial OEM applications.
Fieldbus junction bricks
08 July, 2008 | Turck Australia Pty Ltd
The JRBS junction bricks for Foundation Fieldbus provide quick and easy connection of multiple devices to the main fieldbus trunk. JRBS junction bricks are available with 4, 6, 8, 10 or 12 ports and feature removable terminals for simple, efficient installation and wiring modification in tight spaces.
Diagnostic power conditioner
17 June, 2008 | Turck Australia Pty Ltd
TURCK's Diagnostic Power Conditioner system (DPC) for Foundation Fieldbus H1 features an integrated diagnostics module.
