Wireless > Interfaces, gateways & modems

Monitoring remote pump infrastructure: the benefits of 4G

29 July, 2019

Improvements in 3G and 4G mobile network coverage have enabled the development of devices that can help to remotely monitor pumps and associated infrastructure.


Cybertec 2455 LTE 4G cellular router

20 August, 2015

Designed and manufactured locally to suit Australian environmental conditions, the Cybertec 2455 LTE 4G cellular router provides a high level of reliability with isolated power and serial ports.


Red Lion cellular module for Graphite HMI platform

06 July, 2015

Red Lion's HSPA+ (GMHSPA) cellular module for its Graphite HMI platform uses an HSPA+ cellular network to provide data communication to remotely located assets across oil and gas, water and wastewater, power, utility and alternative energy applications.


Siemens Scalance WLAN devices

19 September, 2013

The latest WLAN components from the Siemens Industry Automation division offer a data rate of up to 450 Mbps, making them suitable for applications with video, visualisation or voice data.


STS GSM data logger communication module

08 August, 2013

The STS GSM communication module for the STS range of data loggers is a reliable and durable communication module that can be used to assist in the continuous monitoring of ground and surface waters.


Phoenix Contact Radioline Modbus RTU gateway

21 March, 2013

I/O signals from Radioline systems can now be connected directly to control units via the Modbus RTU protocol.


Conlab ZigSense wireless sensing system

28 December, 2012

ZigSense is an Australian-made wireless sensing system using ZigBee mesh network technology as its core communications layer.


Robustel Technologies GoRugged range of wireless M2M modems and gateways

12 December, 2012

The GoRugged range features smart wireless modems and gateways with a rugged metal enclosure for industrial applications. Robustel’s GoEmbedded product line features an embedded cellular modem, for increased communication through numerous interfaces.


Weidmuller WL Series long-haul ethernet radio modems

23 November, 2012

The WL Series provides remote wireless I/O mapping where up to 31 I/O units can be daisy-chained to a transceiver at each end.


Banner Engineering SureCross Q45 Remote Device (RD) wireless sensor

03 October, 2012

The SureCross Q45 Remote Device (RD) wireless sensor is capable of interfacing with isolated dry contacts or PNP outputs.


Advantech EKI-6340 series outdoor mesh AP and EKI-6351 series indoor mesh AP/station

26 September, 2012

The EKI-6340 series (outdoor) and EKI-6351 series (indoor) mesh AP/stations feature Intelligent Mesh (iMesh) technology with self-forming and self-healing scalable flexible wireless network deployment.


Secomea SiteManager 3G secure remote access

16 May, 2012

Danish company Secomea has added a 3G model to its secure remote-access SiteManager range.


Maestro-Wireless Maestro 3G industrial router

20 September, 2010 by

The Maestro-Wireless Maestro 3G industrial router is designed to allow fast connectivity to the internet, to back-end applications or to other devices. It is a GPRS/EDGE/UMTS/HSPA+ wireless single-port router for fast wireless IP connectivity.


Data-Linc Group SRM7210E wireless ethernet modem

25 May, 2010 by

Data-Linc Group’s SRM7210E wireless ethernet modem is factory preconfigured for easy installation. It offers a rated range of up to 32 km in optimal conditions with line-of-sight and an omnidirectional antenna - farther with repeaters.


Quatech ABDG-ET-IN5010 industrial wireless ethernet bridge

17 May, 2010 by

Interworld Electronics has released the Quatech ABDG-ET-IN5010 Airborne industrial wireless ethernet bridge. The Airborne products are a line of integrated 802.11 radios and device servers, designed to address the demands of complex machine-to-machine (M2M) applications.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd