Wireless > Interfaces, gateways & modems

Hirschmann BAT54-Rail Single WLAN access point

17 May, 2010 by

Belden has extended its range of Hirschmann products to include the BAT54-Rail Single WLAN access point. This device is designed for mounting on DIN rail and can be used both as access point and access client. Unlike its ‘big brother’ the BAT54-Rail, this access point has only one WLAN interface, making it a cost-effective alternative for applications that do not require a second interface. In common with the BAT54-Rail, however, the BAT54-Rail Single offers the full range of functions supported by the HiLCOS operating system.


FastLinc FLC820G IEEE 802.11 ethernet wireless modems

28 April, 2010 by

Wired & Wireless has released the FastLinc range of IEEE 802.11 industrial ethernet wireless modems using 2.4 GHz direct sequence technology. With an output power much higher than commercial 802.11b/g products and with a rugged design, the FastLinc range is suitable for industrial SCADA and factory automation systems.


Data-Linc Group wireless FLC910E OFDM radio modem

24 March, 2010 by

Data-Linc Group’s industrial-grade wireless FLC910E radio modem is part of the FastLinc range of high-speed modems. The modem is suitable for in-plant applications, even in high-noise industrial environments such as high-voltage areas and near variable-frequency drives (VFDs) or arc welders.


VEGA PLICSMOBILE GSM/GPRS instrument interface

25 February, 2010

The PLICSMOBILE transmitting and receiving unit is equipped with a standard SIM card and sends the measured values via GSM-GPRS service. With this module, remote diagnosis and service can also be carried out worldwide over the public telephone network. PLICSMOBILE can be integrated into the double chamber housings of the VEGA plicsplus series or separately connected to any plicsplus or plics sensor.


Honeywell XYR 6000 wireless universal I/O transmitters

22 February, 2010 by

Honeywell has added universal input/output (I/O) transmitters to its family of XYR 6000 wireless products. The transmitters allow manufacturers to wirelessly monitor more plant points with fewer devices.


Moxa AWK-6222 outdoor dual-RF wireless AP/bridge/client

15 January, 2010

The Moxa AWK-6222 outdoor dual-RF wireless AP/bridge/client is designed to provide a flexible solution for industrial applications in a critical environment.


512 K ethernet data radio

10 November, 2009 by

Trio Datacom has released a 512 Kbps version of the JR900 frequency hopping data radio for industrial ethernet communications in the 900 MHz licence-free band. The JR900 has data rates at twice the speed of the original to enable a wide variety of applications that require higher data capability than typical SCADA and telemetry systems can provide.


Wireless I/O modules

20 October, 2009 by

The Interworld Electronics Model WWP-IIRO-8 features a pair of 16-channel digital I/O units that communicate directly with each other via a 2.4 GHz wireless connection.


Wireless I/O adapter

29 September, 2009 by

The Wireless Point I/O Adapter (ILX34-AENWG) is a high-speed, standards-based 802.11g wireless I/O communication adapter offering a wireless alternative for linking Rockwell Automation controllers to distributed process I/O modules.


Serial to ethernet device server

10 September, 2009 by

Lantronix has upgraded its existing compact XPort serial to ethernet device server with RS485 protocol interface feature. The standard XPort is now able to be used in RS485/RS422/RS232 interface applications, and the XPort-Modbus will be suitable for industrial Modbus use.


Wireless sensor networks platform

19 August, 2009

The NI wireless sensor networks (WSN) platform offers a complete remote monitoring solution that consists of NI LabVIEW graphical programming software and reliable, low-power wireless measurement nodes.


Ethernet to serial converter

19 August, 2009

TRIO Datacom have introduced the JS100 Ethernet to Serial converter designed to allow communications over point to point and point to multipoint radio channels with remote devices, eg, RTU or PLC, which have ethernet data ports.


Wireless transmitter and receiver

30 July, 2009

Designed for robust, secure communication, the K-Tek DX80 wireless transmitter and receiver includes two devices: a node that resides in the field and interfaces to K-Tek's measurement devices; and a gateway that resides in the main control panel and interfaces to a PC or PLC.


Wireless ethernet devices

30 July, 2009

Leveraging the IEEE 802.11 WiFi standard, Weidmuller's WL-EM-240 wireless ethernet modem provides an increased power output of 300 mW to ensure enhanced signal strength in difficult industrial environments.


Digital data radio modem

20 July, 2009

Trio Datacom has introduced the M Series Gen II MR450 a simplex/half duplex remote digital data radio modem for dependable data communications.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd