Exair atomising spray nozzles
28 April, 2011 | Supplied by: Compressed Air Australia Pty Ltd
Exair’s atomising spray nozzles are internal mix nozzles that atomise fluids in a range of spray patterns for a variety of uses. They combine liquid and compressed air to create a mist of atomised liquid that can be easily adjusted to meet the needs of your application.
Swagelok RHPS series general industrial regulators
28 April, 2011 | Supplied by: Swagelok Corporation
Swagelok RHPS series general industrial regulators offer accurate pressure control of pressures from 0-400 bar in gas and liquid systems, ½to 2″ sizes. RS and RSH model regulators employ either a spring-loaded diaphragm or piston as the sensing element, depending on the outlet pressure range desired.
Dwyer Series DCS/RDCS springless dust collection valves
23 March, 2011 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series DCS/RDCS springless dust collection valves are suitable for use with the Dwyer Series DCT1000 and Series DCT500 duct collection timer boards. A springless design offers durability and reliability.
Exlar EXP-24 ATEX-rated valve positioner
21 March, 2011 | Supplied by: Applied Automation
The Exlar EXP-24 positioner can be used to control most of Exlar’s three-phase linear and rotary actuators, including the EL100 linear and ER115 rotary actuators while complying with both ATEX (Directive 94/9/EC) and CSA regulations for explosion-proof applications.
Boge CF series frequency-controlled screw compressors
21 March, 2011 | Supplied by: Boge Compressors (Australia) Pty Ltd
The Boge CF series frequency-controlled screw compressors are designed to provide a quiet, compact and energy-efficient compressed air solution to the medium-sized compressed air user with a fluctuating demand for compressed air.
Parker ATEX- and IECEx-certified process actuators and valve controls
17 March, 2011 | Supplied by: Custom Fluidpower
The Parker range of ATEX- and IECEx-certified process actuator and valve control products is now available.
Control valves enable safer dust suppression process in open-cut mine
02 March, 2011 | Supplied by: Pentair Valves & Controls
Effective dust control around mine sites is critical from an environmental as well as from a health and safety perspective.
SSP Pumps Series A rotary lobe pump
25 February, 2011 | Supplied by: Matrix Process Solutions Pty Ltd
The Series A rotary lobe pump from SSP Pumps is designed for applications within general industry and the mining, chemical and waste water industries.
Sullair Champion V-Series range of compressors
25 February, 2011 | Supplied by: Hitachi Global Air Power
The Champion V-Series range of compressors features Sullair’s Optimal Flux technology to provide precise and dynamic calibration between drive and motor, to minimise losses and maximise performance and energy savings.
Special pumps for crude oil caverns
23 January, 2011 | Supplied by: KSB Australia Pty Ltd
KSB Group has supplied Scandinavian Tank Storage Sweden with pumps intended for discharging crude oil from an underground rock cavern.
Sullair's national customer service centre
21 January, 2011 | Supplied by: Hitachi Global Air Power
Sullair's new national service centre has been handling 300 calls per day since opening in November.
CompAir Delcos XL touch screen compressor controller
17 January, 2011 | Supplied by: CompAir (Australasia) Limited
The Delcos XL built-in, easy-to-use touch screen controller is designed to ensure the reliable and efficient operation of its rotary screw compressors.
KSB RDLO axially split case water pump series
17 January, 2011 | Supplied by: KSB Australia Pty Ltd
The RDLO series of axially split case water pumps offers hydraulic efficiencies up to 91% at BEP, using double volute casings and three different impeller profiles in most sizes for optimum selection and hydraulic stability.
Securing Sydney’s water pumping needs
05 January, 2011 | Supplied by: ABB Australia Pty Ltd
ABB’s high-efficiency motors and variable speed drives have provided an energy-efficient solution for transporting large volumes of desalinated water from Sydney’s newest water supply to over 1.5 million Australian residents living in New South Wales.
Moog Speed Controlled Pump System
20 December, 2010 | Supplied by: Moog Australia Pty Ltd
Moog has released a pump system designed to provide injection-moulding and blow-moulding machine builders with a motion control solution that can lower energy consumption in hydraulic machines by up to 30%. The Moog Speed Controlled Pump System is based on three of Moog’s products - a fixed displacement radial piston pump (RKP), a brushless servomotor and a modular multi-axis programmable motion control servo drive (MSD).
