CAPS Australia Harsh Environment Efficient VFD Option (HEEVO)
09 October, 2011 | Supplied by: CAPS Pty Ltd
In harsh mine site and construction environments, most variable-speed compressors available in the Australian marketplace may struggle with high heat, humidity and dust levels. The result can be frequent breakdowns or shutdowns, costly component failures or expensive preventative maintenance.
Boge BC series oil-free air converters
05 October, 2011 | Supplied by: Boge Compressors (Australia) Pty Ltd
The Boge BC series converters are designed to cost-effectively assist producing oil-free compressed air to Class 0 (ISO 8573-0) quality.
Five critical factors for selecting fieldbus valve manifolds
26 September, 2011 | Supplied by: Ascomation Pty Ltd
In today’s highly automated machines, fieldbus valve manifolds are replacing conventional hard-wired solutions. They more easily perform vital functions by integrating communication interfaces to pneumatic valve manifolds with I/O capabilities.
Boge SO -2 series oil-free screw compressors
02 September, 2011 | Supplied by: Boge Compressors (Australia) Pty Ltd
Boge has launch its second-generation SO series oil-free screw compressors. The second generation models introduce higher efficiency, reduced sound pressure levels and a service friendly layout to the 110 to 255 kW performance class.
Alicat Scientific PC and PCR Series digital electronic pressure controllers
01 September, 2011 | Supplied by: Duff & Macintosh
Alicat Scientific’s line of PC Series and PCR Series digital single valve electronic pressure controllers offer a variety of output options including 0-5 V, 0-10 V, 4-20 mA and RS-232.
Vegetable oil producer saves energy with new pump technology
18 July, 2011 | Supplied by: IDEX
Feed Energy, based in Sioux City, Iowa, has been the premier supplier of high-quality liquid feed solutions for livestock and poultry for nearly 25 years. The company specialises in premium vegetable oil production.
Boge D Series adsorption dryers
15 July, 2011 | Supplied by: Boge Compressors (Australia) Pty Ltd
The Boge D Series adsorption dryers utilise the traditional twin tower system; however, each tower contains a cartridge that contains pre- and after-filtration as well as the desiccant media - while one tower adsorbs humidity, the other one regenerates the desiccant.
Swagelok pre-engineered fluid distribution header
14 July, 2011 | Supplied by: Swagelok Corporation
A pre-engineered, fully documented piping system, the Swagelok Fluid Distribution Header (FDH) can serve as a distribution or collection manifold in gas or liquid applications. The FDH is a Swagelok Pre-Engineered Subsystem, part of a series of pre-engineered, preassembled products designed to provide increased efficiency in installation, operation and procurement in fluid systems.
Superior Pump Technologies range of F&B pumping solutions
13 July, 2011 | Supplied by: Superior Pump Technologies
Superior Pump Technologies specialises in supplying pumping equipment to the food industry, as well as oil and gas, water and wastewater and pharmaceutical users. The company designs and builds pump units tailored to specific users’ requirements.
Swagelok RHPS Series TBRS and TBVS low-pressure gas regulators
12 July, 2011 | Supplied by: Swagelok Corporation
Swagelok RHPS Series TBRS and TBVS model regulators are designed to provide accurate pressure control in low-pressure gas systems. One common application is accurate control of a blanketing (inert) gas in a closed tank or vessel. Installed on a tank’s inlet and outlet, the TBRS (inlet) and TBVS (outlet) regulators maintain a tank’s blanketing gas at a constant pressure.
Sullair airs food technology solutions
06 July, 2011 | Supplied by: Hitachi Global Air Power
The forthcoming FoodPro 2011 exhibition gives Sullair Australia the opportunity to display its range of compressed air solutions available to the food and beverage industry.
Boge stand-alone Duotherm heat-recovery system
01 July, 2011 | Supplied by: Boge Compressors (Australia) Pty Ltd
Boge has launched a stand-alone Duotherm heat-recovery system. The compact module is a suitable solution for compressed air users wanting to optimise the energy usage of their existing compressed air system via heat recovery.
Making smart choices with compressed air
26 June, 2011
There are several well-known - but probably misunderstood - facts about compressed air usage and systems throughout Australian industry. A consequence of this is that your compressed air system is an ideal place to start when looking into energy-efficiency opportunities.
Hydac Hybox Flex Basic hydraulic power unit
22 June, 2011 | Supplied by: HYDAC International
The Hybox Flex Basic hydraulic power unit uses Hydac components including tanks, pumps, electric motors and a specially designed tank-mounted manifold that incorporates the return filter, accumulators and valving, and is suitable for all machine manufacturers.
Ingersoll Rand R-Series rotary screw air compressors
15 June, 2011 | Supplied by: CAPS Pty Ltd
The Ingersoll Rand R-Series 90-160 kW rotary screw air compressors use progressive adaptive control (PAC) to protect the equipment and prevent unnecessary or emergency shutdowns of production lines caused by extreme situations or maintenance oversights. An integrated, intelligent system, PAC continually monitors key components and operating parameters and adjusts these to prevent unexpected downtime.
