Vanton Pump Chem-Gard CGMC thermoplastic centrifugal pump
23 August, 2010 | Supplied by: Acromet (Aust) Pty Ltd
The Chem-Gard CGMC close-coupled, magnetically driven thermoplastic centrifugal pump from Vanton Pump is available in sizes from 38 x 25 x 152 to 76 x 51 x 203 mm for flows to 91 m3/h at heads to 50 m TDH.
DIY hydraulics
13 August, 2010 | Supplied by: K-One Fluid Power
Netherlands-based AMCA Hydraulic Fluid Power has designed a self-build modular concept for its hydraulic proportional load-sensing directional control valves. The build concept is designed to provide distributors, OEMs and end users with a flexible and cost-effective solution that will suit a wide range of applications.
Increased flexibility with compact manifold design
09 August, 2010 | Supplied by: Custom Fluidpower
In response to a customer’s requirement to improve safety and operating efficiency, Custom Fluidpower has redesigned a customer’s application to eliminate multiple manifolds and valves. This has effectively replaced these items with a single manifold also incorporating state-of-the-art electronic control components.
Various hydraulic lubrication applications addressed
09 August, 2010 | Supplied by: Custom Fluidpower
The hydraulics, pneumatics and electronics provider Custom Fluidpower has been involved in the design, installation and maintenance of various lubrication and oil systems recently.
Burkert 8791, 8792 and 8793 valve positioners
28 July, 2010 | Supplied by: Burkert Fluid Control Systems
A series of digital positioners that provide zero air bleed at rest position have been released.
Ingersoll Rand R-Series 90-110 kW rotary screw air compressors
19 July, 2010 | Supplied by: CAPS Pty Ltd
The Ingersoll Rand R-Series 90-110 kW rotary screw air compressors have an integrated, intelligent system, called Progressive Adaptive Control (PAC), that continuously monitors key operating parameters and adapts to prevent unexpected downtime. For example, should the filtration system start to clog or foul on a variable speed unit, the system will immediately display a real-time warning and maintenance indicator. Unlike conventional compressor controls, it won’t shut down the compressor should the situation worsen. Instead, it reduces the airflow to prevent overloading the compressor cooling system.
Pulsafeeder PulsaPro 900 process and metering pump
19 July, 2010 | Supplied by: IDEX
Pulsafeeder PulsaPro 900 is a hydraulic diaphragm process and metering pump specifically developed for applications such as the oil and gas, chemical, and petrochemical industries.
Boge API-SO series of oil-free compressors
19 July, 2010 | Supplied by: Boge Compressors (Australia) Pty Ltd
The Boge API-SO series of oil-free compressors now meets the API 619:2004 standard. The series incorporates the same design features of the standard SO series and is suitable for chemical and pharmaceutical, food and drinks and semiconductor industries as well as the petrochemical and gas industries.
Oil-free air supply for recycled water project
06 July, 2010 | Supplied by: CAPS Pty Ltd
The Glenelg to Adelaide Park Lands Recycled Water project is designed to provide a replacement for billions of litres of drinking water previously used for irrigation and significantly reduce treated wastewater levels in the Gulf St Vincent.
Pumping abrasive and shear-sensitive liquids
28 June, 2010 | Supplied by: Matrix Process Solutions Pty Ltd
Understanding a fluid’s rheology is fundamental in designing an efficient pumping and process solution.
SAM Hydraulik MD10 series of axial piston pumps
23 June, 2010 | Supplied by: Brevini Australia Pty Ltd
The SAM Hydraulik MD10 series of axial piston pumps is suitable for medium-pressure use, in closed loop applications. Rated at 250 bar (3600 psi) for continuous use, these pumps can take a peak pressure of up to 350 bar (5000 psi).
Gems Sensors & Controls K Series inert isolation solenoid valves
22 June, 2010 | Supplied by: Control Components Pty Ltd
Gems Sensors & Controls has announced the K Series range of inert isolation solenoid valves. Constructed from chemically inert materials such as PTFE, ETFE, EPDM, FKM, FFKM, PEEK, PPS and PSU, the series is designed for any application requiring various levels of chemical resistance or sample purity. Liquid chromatography, gas analysis and water quality testing are example applications.
Burkert SideControl 8791 valve positioner
17 June, 2010 | Supplied by: Burkert Fluid Control Systems
The 8791 positioner is the basic version of the SideControl 8792 and 8793 positioners and is specially designed for ease of operation. The SideControl 8791 features the same pneumatic positioning system for control accuracy and dynamics.
Festo MS6-SV soft start/exhaust valve with integrated safety relay
25 May, 2010 | Supplied by: Festo Pty Ltd
The Festo air-preparation range is designed to give users a certified unit that can be integrated into new or existing circuits, either standalone or housed in an air preparation module. As a supply device providing a safe exhaust function, it offers a number of possible applications and benefits.
Festo MHJ valve series
25 May, 2010 | Supplied by: Festo Pty Ltd
The MHJ valve series has the ability to output very short pulses of air, which can result in energy savings and makes it suitable for various applications. It features a long service life and high precision with direct actuation for switching times of less than 1 ms, flow rates of 50, 100 and 150 L/min and repetition accuracy of less than 0.1 ms.
