Instrumentation > Flow

Sierra Instruments InnovaSonic ultrasonic transit-time flow meters

06 April, 2015

Sierra has redesigned its ultrasonic flow meter product line to use similar components and improve usability, allowing Sierra to pass cost savings to customers with improved precision.

Rosemount 4088 multivariable transmitter

19 March, 2015

The Rosemount 4088 multivariable transmitter is designed for upstream and midstream oil and gas applications, providing differential pressure, static pressure and temperature measurement from a single transmitter.

Krohne H250 variable area flowmeter

04 February, 2015

The H250 variable area flowmeter with M40 indicator is suitable for the flow measurement of liquids, gases and saturated vapour in the process industries and has a modular design.

Krohne Optiswirl 4200 vortex flowmeters

22 December, 2014

The Optiswirl 4200 vortex flowmeter is designed for the measurement of conducting and non-conducting liquids, gases and steam.

Rosemount 8750W magnetic flowmeter

29 October, 2014

The Rosemount 8750W magnetic flowmeter is designed for water, wastewater and utility applications, and can be calibrated without shutting down the process and without the need for external equipment.

Katronic KATflow 100 ultrasonic flowmeter

29 October, 2014

The Katronic KATflow 100 is for permanent flow metering applications and has a reduced specification for applications where the features of the more advanced KATflow 150 and KATflow 170 are not required.

Emerson Micro Motion Model 5700 Coriolis flow transmitter

27 October, 2014

The Model 5700 is applicable for a broad range of applications, from liquid and gas custody transfer to simple process control.

Emerson Micro Motion ELITE CMF350 Coriolis flowmeter

12 September, 2014

The ELITE CMF350 flowmeter features an optimum level of scalability and standardisation for the best fit in applications where flow rate accuracy with low pressure drop and high turndown is critical.

Flowmeter calibration management

05 September, 2014 by Ben Keizers and Kyle Shipps*, Endress+Hauser USA

Failure to calibrate flowmeters can negatively impact performance, while calibrating too frequently can result in excessive costs without providing any benefits. So, the question is, how do you determine if calibration is needed and what the frequency should be?

Sierra Instruments QuadraTherm 640i and 780i air flow meters

25 August, 2014

The QuadraTherm 640i and 780i air flow meters have received global approvals for safe operation in potentially hazardous environments from cFMus, ATEX and IECEx.

Flowrox Deposition Watch pipe deposition instrument

22 August, 2014

Deposition Watch is an instrument designed to enhance the monitoring of pipelines and related flow-process equipment affected by paraffin wax and asphaltene deposits.

The new best-in-class flow monitoring technology

13 August, 2014

Following the industry best practices, your plant probably uses some kind of analyser technology that needs sample flow monitoring (mass spectrometers, optical spectrometers, photometers, etc).

Dwyer Series UFB ultrasonic flow meter

25 July, 2014

The Series UFB has an easy-to-use compact and lightweight design and is intended for mechanical devices using ideally homogeneous liquids that contain no air pockets.

FCI ST50 flow meter

03 July, 2014

Highly suitable for compressed air flow measurement, the ST50 features a wide flow range from 0.23 to 122 NMPS for air, compressed air or nitrogen, using thermal dispersion mass flow sensing technology.

Rittmeyer clamp-on ultrasonic flow sensor for the Risonic module

30 May, 2014

The Rittmeyer clamp-on ultrasonic flow sensor has a magnetic mounting frame which allows measurement of flow in partially exposed pipes and can be used in permanent installations or non-magnetic pipes with use of adhesive.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd