Air and gas flowmeters
05 October, 2008The PFM range of flowmeters is for use with air and a variety of gases. With flow measurement of air, liquids, even harsh acids and alkalis, the SMC range of flow measurement equipment can provide in situ displays, remote indicators, analog transmission and digital switching. Some models are equipped with flow adjustment to permit the required flowrate to be preset.
Magnetic inductive flowmeter
05 October, 2008The DMI series flowmeter operates on the magneto-inductive principle. With no protrusions into the pipe, conductive liquids and slurries can be measured with virtually no system pressure loss. The DMI is available with a PEEK or PVDF flow tube and Hastelloy C measuring electrodes are standard.
Hygienic flowmeters
05 October, 2008The HygienicMaster range of flowmeters is targeted primarily at the food and beverage, pharmaceutical and biotechnology industries. The range provides accurate measurement in hygienic applications ranging from water through to fluids with extreme viscosities, high solid concentrations or low conductivity.
Flow sensor for solids
05 October, 2008FlowJam is a non-contact flow/no flow sensor for solids. It uses microwave technology to give reliable results under harsh conditions of dust and sunlight. It is a suitable device for detecting solid flows in hoppers, conveyors, screw conveyors, air slides, etc.
Variable area flowmeters
05 October, 2008Swagelok variable area flowmeters (VAFs) are used to measure liquid and gas flow rates by means of a tapered tube and float and can provide highly accurate measurement with individually calibrated scales and a 10:1 turndown ratio.
Who adds value?
12 September, 2008 by John ImmelmanBuilding a greenfield process plant today inevitably throws up a host of challenges, but successful greenfield projects take advantage of a potent ingredient in the engineering chain: added value.
Inductive flowmeters
05 September, 2008The type MIK flowmeters offer four measuring tube widths from G 1/4 AG to G 1 AG and thus four measuring ranges from 0.5-4 to 10-100 L/min. These devices use the magnetic-inductive principle of measurement and are suitable for many applications like the monitoring of additives or cooling agents, consumption measurement or charging.
Biomethane-optimised mass flowmeter
05 September, 2008FCI’s ST51 flowmeter is designed to measure digester gas, biogas and other methane-composition biofuel gases as well as natural gas. FCI precision calibrates all ST51 flowmeters in its NIST-traceable flow lab to match the gas composition of the user’s digester system and under the specific flow conditions of the user’s digester system.
Coriolis flowmeter for the food industry
05 August, 2008Stringent hygienic requirements are at the core of process instrumentation in the food and beverage industry. The Proline Promass S stainless steel Coriolis flowmeter meets the hygienic requirements for dairies, wineries and food processing plants and delivers a high level of accuracy (0.1% of reading).
Dense phase magnetic flowmeter
05 August, 2008Magnetic flowmeters are commonly used for the metering of liquids. They are easily installed, non-intrusive and easy to calibrate. DensFlow is a magnetic flowmeter for solids. It is easily installed, non-intrusive and easy to calibrate.
Turbine wheel flowmeter
08 July, 2008The turbine wheel flowmeter type DPE operates according to the well-known blade wheel principle. Numerous liquid media of low viscosity, ranging from distilled water to fuels, alcohol and various chemicals can be monitored with this robust measuring instrument.
Flowmeters for water treatment
08 July, 2008The materials used in the construction of Titan flowmeters are of the highest standard and include AISI316 stainless steel, engineering plastics and sapphire. Extensive use is made of plastic materials such as PEEK and PVDF, also chosen for their inherently good chemical resistance.
DVZ Series vortex flowmeters
08 July, 2008The DVZ Series flowmeters are compact and inexpensive and can be utilised in all applications for low-viscosity fluids. Since the units operate without any mechanical moving parts, they are practically maintenance free and have distinct advantages compared with units based on the float or rotor principle.
Acrylic flowmeter
08 July, 2008The KFR acrylic flowmeter offers a balance between low-cost, accuracy and range availability. Bridging the micro-flow and large flow ranges, this meter can provide an effective solution to many industrial applications.
Series UXF2 ultrasonic flow transmitter
08 July, 2008The series UXF2 ultrasonic flow transmitter is an economical alternative to magnetic, vortex and differential pressure transmitters. This transit time flowmeter combines advanced microprocessing detection methods with a versatile design to provide accurate and obstructionless flow measurement of any clean water application.
