Series PFT paddlewheel flow sensor
17 September, 2010The Series PFT paddlewheel flow sensor is designed for monitoring liquid flow in 3.8 to 100 cm pipes. The insertion design allows one model to be used for the full pipe size capability.
GE Panametrics AquaTrans AT868 liquid flow ultrasonic transmitter
23 August, 2010The AquaTrans AT868 liquid flow ultrasonic transmitter combines ultrasonic flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point.
Endress+Hauser Promass E Coriolis flowmeter
12 August, 2010Endress+Hauser’s Promass E is a Coriolis flowmeter with true 2-wire technology. Most 2-wire Coriolis meters are limited to using only 12-20 mA due to their power requirements, whereas the Promass E offers the full output range of 4-20 mA, thereby offering twice the resolution and accuracy.
Trimec RT20 flow rate totaliser
05 July, 2010 byTrimec has released the RT20 flow rate totaliser in a robust metal housing. This instrument is compatible with most manufacturers’ flowmeters and comes with scaled pulse and high/low flow alarm outputs as standard.
Sentinel LCT/LNG ultrasonic flowmeter
04 July, 2010The Sentinel LCT/LNG ultrasonic flowmeter is designed to provide accurate flow measurement of hydrocarbon liquid and cryogenic liquid application. Extensive computational fluid dynamics (CFD) has been used to ensure high accuracy, viscosity independence and reliable flow measurement.
Trimec RT20 flow rate totaliser
02 July, 2010Trimec has released the RT20 flow rate totaliser in a robust metal housing. This instrument is compatible with most manufacturers’ flowmeters and comes with scaled pulse and high/low flow alarm outputs as standard.
ABB WaterMaster self-verifying electromagnetic flowmeter
21 June, 2010 byABB has announced that their electromagnetic WaterMaster flowmeter, designed specifically for the water, wastewater and effluent sewage markets, now has an in-situ flowmeter verification capability. Built into the flowmeter the VeriMaster system has the ability to perform in-situ verification across the full range.
Burkert LFC (liquid flow controller)
17 June, 2010 byThe LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.
Burkert 8026, 8036 and 8076 digital flow transmitters
17 June, 2010 byThe 8026, 8036 and 8076 model digital flow transmitters are now made in the consistent stainless steel design of the Element series.
Furness Controls FCO96 series laminar flow elements
25 May, 2010 byThe FCO96 series of laminar flow elements from Furness Controls is a range of primary flow devices for the measurement of low volume air and gas flows from 0.1 mL/min to 10,000 L/min.
Dwyer Series PFT paddlewheel flow sensor
12 May, 2010The Series PFT is a paddlewheel flow sensor used to monitor liquid flow rates in pipes from 38 mm to 1 m with one size-adjustable sensor.
Applying Coriolis technology to high-pressure applications
06 May, 2010 by John Daly*Measurement at high pressure needs heavy-duty metering.
Endress+Hauser Prowirl 73 multivariable vortex flowmeter
21 April, 2010Endress+Hauser’s Prowirl 73 is a standalone, multivariable vortex flowmeter for measuring mass flow, energy, density, temperature and volumetric flow of liquids, gases and steam.
Bronkhorst High-Tech In-Flow mass flow meters
20 April, 2010 byThe Bronkhorst High-Tech In-Flow mass flow meters are modular instruments of rugged design according to IP65. They can be combined with integrated or close-coupled control valves to form compact digital mass flow controllers
Fluid Components International FS10A flow switch/monitor
25 March, 2010The Model FS10A flow switch/monitor from Fluid Components International (FCI) is a low-cost solution for continuously verifying flows within liquid or gas process analyser sampling systems. It is suitable for the continuous monitoring of analyser sample flows to provide the highest integrity process analysis without interruption.
