Factory automation

Rexroth IAC-R and IAC-P Integrated Axis Controller series

28 April, 2010 | Supplied by: Bosch Rexroth Pty Ltd

The IAC-R and IAC-P Integrated Axis Controller series by Rexroth allow for simplified construction and commissioning. In these modules the drive and control has combined intelligent control electronics with reliable hydraulic drive units. The fieldbus-capable axis controllers use decentralised intelligence to reduce the load on the higher-level control system.


Tolomatic IMA integrated-motor rod-style actuator

28 April, 2010 | Supplied by: Pneumatic Products

Tolomatic’s integrated-motor rod-style actuator (IMA) is now capable of delivering up to 14.6 kN of force when equipped with the roller-screw option. The actuator incorporates a hollow-core rotor and skewed motor windings into its servomotor design for a compact package with increased dynamic performance and service life compared to traditional rod-style actuators. The integrated motor design is suitable for applications such as pressing, clamping, valve control, spot welding and volumetric filling.


TCP/IP-compatible drives simplify crane simulator

21 April, 2010 | Supplied by: Baldor Australia Pty Ltd

A three-axis motion platform, based on Baldor Electric Company’s ethernet-compatible drives, is helping to further increase the realism of crane training experience.


Turck LI-Q25 series linear position sensors

20 April, 2010 | Supplied by: Turck Australia Pty Ltd

The LI-Q25 series linear position sensors are designed to replace magnetostrictive and potentiometer devices to deliver precise, repeatable measurements in metal processing machines, rolling mills or injection moulding machines.


Baldor MicroFlex e100 and MotiFlex e100 drives

20 April, 2010 | Supplied by: Baldor Australia Pty Ltd

Baldor Electric has launched a range of smart drives that feature an ethernet interface compatible with the deterministic ethernet-compatible motion control standard, Powerlink.


Hengstler ACURO-XR series multi-turn encoders

20 April, 2010 | Supplied by: Automated Control Pty Ltd

The Hengstler ACURO-XR series encoders are claimed to be capable of withstanding high acceleration rates, mechanical stresses and extreme climatic fluctuations, and are fully functional in underwater operating conditions. Their operating temperature range is from -40 to +100°C.


Banner QS18 adjustable-field foreground suppression sensors

20 April, 2010 | Supplied by: Micromax Pty Ltd

The Banner Engineering World-Beam QS18 adjustable-field foreground suppression sensors are designed to reliably detect objects regardless of colour, reflectivity, surface irregularities or background conditions. The sensor’s universal mounting design makes installation quick and easy, while a screwdriver adjustment allows for precise set-up of sensing range.


AMCI stainless steel resolvers

20 April, 2010 | Supplied by: Automated Control Pty Ltd

AMCI’s stainless steel resolver transducer family offers options of 303 or 304 stainless steel housing and shaft, and a variety of mounting styles. The IP67-rated product line comes standard with either a 1/4, 3/8 or 5/8 stainless steel shaft and an oversized double row sealed bearing.


Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drives

14 April, 2010 | Supplied by: Rockwell Automation Australia

The Allen-Bradley Kinetix 300 is a range of EtherNet/IP indexing servo drives, designed to eliminate the need for a dedicated motion network, allowing easier commissioning, configuration and start-up of servo drives, motors and actuators. It is also designed to enable the integration of a control solution over EtherNet/IP, including HMI, PACs, I/O and motion, while maintaining reliable, high-speed connectivity.


Turck BIM-UNR position sensors for C-groove cylinders

08 April, 2010 | Supplied by: Turck Australia Pty Ltd

The BIM-UNR line of compact magnetic cylinder position sensors now includes a dual sensor designed for detecting short and long stroke C-groove cylinders. BIM-UNR dual sensors combine two sensors through one cable connection to speed installation, as well as lessen wire costs and connection points. This design makes the sensor beneficial in areas where multiple cylinders are used, as it only requires a single cable. With dimensions of 2.9 x 4.6 x 18 mm, the sensors feature a low profile.


ASM WS31 linear position sensor

24 March, 2010 | Supplied by: Automated Control Pty Ltd

The WS31 linear position sensor series from ASM offers measuring ranges of 250 and 500 mm and includes a mounting bracket that allows for easy and flexible installation of the sensor and thus position measurement in almost every direction.


How to plan your first vision system

21 March, 2010 | Supplied by: Dindima Group Pty Ltd

Developing a machine vision application for the first time need not be a headache. If you follow a thorough, three-stage process to develop, test and deploy the project, the results should provide an essential tool in product inspection and valuable insight to enhance overall product quality.


Understanding the IEC61131-3 programming languages

15 March, 2010 | Supplied by: Bosch Rexroth Pty Ltd

It was about 120 years ago that Mark Twain used the phrase “more than one way to skin a cat”. In the world of PLC programming, that cliché is still applicable today. Thanks to the International Electrotechnical Commission (IEC), five standard programming languages have emerged as the most common, used for both process and discrete programmable controllers.


Robotic powder coating improves efficiency at Electrolux

12 March, 2010 | Supplied by: ABB Australia Pty Ltd

Every second of every day in any year around the world, Electrolux sells two of its products. This requires state-of-the-art manufacturing facilities, such as the fully automated and flexible powder-coating facility for oven and grill cavities recently installed at Electrolux’s manufacturing plant in Dudley Park, South Australia.


Turck BIM-UNR miniature magnetic cylinder position sensor

10 March, 2010 | Supplied by: Turck Australia Pty Ltd

The BIM-UNR is a miniature magnetic cylinder position sensor designed to mount within C-groove cylinders with no accessories required. Its dimensions are 2.9 x 4.6 x 18 mm.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd