Equipment

FDA-approved alternative to stainless steel in geared motors

04 May, 2017 | Supplied by: NORD Drivesystems (Aust) Pty Ltd

An anti-corrosion system for geared motors that goes far beyond the effectiveness of surface coatings to deliver a true alternative to stainless steel at a much lower cost has been released in Australia.


Weidmüller FrontCom Vario service interface

02 May, 2017 | Supplied by: Weidmuller Pty Ltd

FrontCom Vario is a compact service interface for switch and control cabinets, providing easy access to the control system or PC and electronics.


Hioki LR8431-20 HiLOGGER data logger

28 April, 2017 | Supplied by: TechRentals

The Hioki LR8431-20 HiLOGGER data logger is capable of simultaneous recording across all 10 fully isolated analog channels.


Intertec GRP inspection door

26 April, 2017 | Supplied by: Intertec

The GRP Inspection Door comes with a window frame made entirely from glass-reinforced polyester, offering a high degree of protection against corrosion combined with good thermal insulation.


maxon motor gearhead, DC motor and encoder combination

24 April, 2017 | Supplied by: maxon motor Australia Pty Ltd

Higher levels of torque and position capability are now possible with the development of adaptive hardware for maxon low-profile brushless DC motors and harmonic planetary gearheads.


mayr power transmission intelligent safety brakes

20 April, 2017 | Supplied by: Regal Rexnord Australia

Intelligent safety brakes ready for Industry 4.0 are now available.


Siemon Cat 6A small diameter UTP cable

18 April, 2017 | Supplied by: Siemon Australia

Siemon has released an updated range of Category 6A unshielded twisted pair (UTP) balanced copper cable that offers a significantly smaller overall diameter and improved performance to better support advanced remote powering applications.


IDEC Corporation EC2B Series enclosures, control stations and accessories

13 April, 2017 | Supplied by: IDEC Australia Pty Ltd

The EC2B Series of enclosures, control stations and accessories are designed for hazardous location applications.


HYDAC DOL starter panels

01 April, 2017 | Supplied by: HYDAC International

HYDAC, as part of its local capabilities, now makes electrical control panels, and is currently offering four models of direct on-line motor starter.


Fluke 9150 Thermocouple Furnace

31 March, 2017 | Supplied by: TechRentals

The Fluke 9150 Thermocouple Furnace can be utilised to check and calibrate industrial thermocouples as small as 1.6 mm at up to 1200°C.


Mettler-Toledo Profile metal detectors

29 March, 2017 | Supplied by: Mettler-Toledo Ltd

Mettler-Toledo Safeline Limited has launched a series of enhanced features for profile throat metal detectors and gravity fall systems. The four enhancements are aimed at making metal detection a smoother, safer, less disruptive process that adds to the profitability of operations.


Schaeffler FAG SNS plummer block housings

28 March, 2017 | Supplied by: Schaeffler Australia Pty Ltd

The latest FAG plummer block housings are large-size bearing housings, engineered to increase the service life of fitted spherical roller bearings by up to 50% compared to conventional plummer block housings.


SEW-Eurodrive opens new service centre in Mackay

24 March, 2017 | Supplied by: SEW-Eurodrive Pty Ltd

SEW-Eurodrive has officially opened its 2000 m2, state-of-the-art Heavy Industrial Service Centre in Mackay.


Flir DM284 all-in-one digital multimeter and thermal imager

20 March, 2017 | Supplied by: RS

The Flir DM284 is an all-in-one true RMS digital multimeter and thermal imager targeting maintenance engineers, panel builders and electricians.


SPX Flow APV DELTA SD4 double seal valve

14 March, 2017 | Supplied by: SPX FLOW TECHNOLOGY AUSTRALIA PTY LTD

SPX Flow’s APV DELTA SD4 double seal valves are designed for safe media separation applications.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd