Equipment

ABB ACS150 micro drive

28 March, 2018 | Supplied by: Control Logic Pty Ltd

ABB's ACS150 micro drive is designed for OEMs, machinery builders or panel builders, and is available in either single- or three-phase supplies with a power range of 0.37 to 4 kW.


Rittal Australia signs APS Industrial as distributor

20 March, 2018 | Supplied by: Rittal Pty Ltd

Rittal Australia has announced a national distribution partnership with APS Industrial, a specialist electrical industrial and automation equipment distributor.


7 common cable management mistakes

02 March, 2018 | Supplied by: Treotham Automation Pty Ltd

When laying cables and hoses in cable carriers and e-chains, there are a number of common mistakes that are unwittingly made that can have an adverse effect on efficiency and reliability.


Intertec PERI SHELTER outdoor equipment shelter

01 March, 2018 | Supplied by: Intertec

PERI SHELTER is designed to protect field-based instrumentation and automation, and makes all the system components that are required for normal operation accessible via the exterior of the building.


Baldor Electric Company is now ABB

01 March, 2018 | Supplied by: ABB Australia Pty Ltd

ABB integrates Baldor Electric under the ABB brand.


igus CFSPECIAL.182.060 Profinet bus cable with high tensile strength

01 March, 2018 | Supplied by: Treotham Automation Pty Ltd

Bus cables often reach their mechanical limits in hanging applications due to their small cross-section and more fragile design.


Fluke 1524 NATA precision handheld thermometer

01 March, 2018 | Supplied by: TechRentals

The Fluke 1524 NATA is a precision handheld thermometer that delivers high accuracy, a wide measurement range, trending and logging.


Phoenix Contact THERMOMARK PRIME mobile thermal printer

27 February, 2018 | Supplied by: Phoenix Contact Pty Ltd

The THERMOMARK PRIME is a transportable, mobile marking centre with integrated marking software.


SMC VHK Series finger valves

19 February, 2018 | Supplied by: SMC Australia | New Zealand

Despite continuous developments in the manufacturing sector, manually operated valves still have their place in production.


Aussie pressure test gear exported to Middle East

16 February, 2018 | Supplied by: Australian Pump Industries Pty Ltd

Australian Pump Industries has announced a major contract for supply of 500 bar hydrostatic test gear for the Middle East.


ABB ACS355 solar pump inverter

29 January, 2018 | Supplied by: Control Logic Pty Ltd

The ABB ACS355 solar pump inverter can be used off-grid using a generator backup or with grid supply, and comes with power point tracking (MPPT) algorithms to derive maximum power from the PV cells when required.


ABB CHK input chokes

18 January, 2018 | Supplied by: Control Logic Pty Ltd

The CHK input chokes are a suitable accompaniment for ABB drives where input chokes are not already included.


Zero-Max ServoClass Model 55 couplings

10 January, 2018 | Supplied by: Naismith Engineering & Manufacturing Co Pty Ltd

Providing high torsional stiffness with low inertia, the ServoClass couplings are designed to handle high-speed reversing loads and precise positioning requirements in demanding servomotor applications.


Klemsan StoP plug-in terminal blocks

21 December, 2017 | Supplied by: Control Logic Pty Ltd

The StoP (Spring-to-Pin) plug-in terminal blocks by Klemsan are designed to make it easier to build signal or power circuits with plugs and sockets.


Bredel pumps provide hygienic solutions at Russian food plant

18 December, 2017 | Supplied by: Watson-Marlow Fluid Technology Solutions

A global brand sauce and condiments manufacturing plant in Russia needed to replace pumps that were proving difficult to clean and maintain, being used to pump products that include cheese sauce, tomato ketchup and mayonnaise.


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd