Olympus 38DL Plus Ultrasonic Thickness Gauge

Sunday, 01 April, 2018 | Supplied by: TechRentals


Oly 38dl adjusted

The Olympus 38DL Plus Ultrasonic Thickness Gauge performs non-destructive measurements. Depending on the material and transducer selection, the gauge has a thickness range from 0.08 to 635 mm. It is supplied with transducers to measure the thickness of steel, cast iron, corroded steel, rubber, fibreglass and composites. It is available to rent from TechRentals.

The 38DL Plus comes with dual- and single-element transducers including D7906-SM, M1036 and M2008 M109-RM (including delay line M202-RM) and is capable of THRU-COAT and echo-to-echo measurements on painted and coated surfaces. This handheld device is commonly used to measure the remaining thickness of pipes, tubes, tanks, pressure vessels, hulls and other structures affected by corrosion or erosion.

The colour transflective VGA display provides high readability in both bright and poorly lit environments. It features a sealed, ergonomic and colour-coded keypad with tactile and audible feedback. This instrument is enclosed in an impact- and water-resistant, gasketed case with sealed connectors, designed for IP67.

For more information, click here.

Online: www.techrentals.com.au
Phone: 1300 767 071
Related Products

NORD IE4 motors

The IE4 synchronous motors are economical due to the use of permanent magnets in the rotor while...

maxon motor EC-I 30IE 5-wire brushless DC motor

The EC-I 30IE motor features a 5-wire connection to simplify implementation and still give a wide...

Lapp EPIC MH modular connector system

Lapp is introducing to Australia its EPIC MH module systems that combine energy, signals and data...


  • All content Copyright © 2018 Westwick-Farrow Pty Ltd