Weidmüller DC-UPS 1.3 Ah battery
28 February, 2014Weidmüller has added a 1.3 Ah battery to its range of DC-UPS batteries, which now provides backup power from minutes to hours for automation components.
Wieland Electric Wipos PB1 power supply series
23 January, 2014The Wipos PB1 power supply series is designed for low installation heights and narrow installation spaces that are common for small distribution boards, shunting distributors and control cabinet applications.
Phoenix Contact EMD-BL compact monitoring relays
21 November, 2013The EMD-BL compact monitoring relays monitor current, voltage and phase sequence.
FEAS SSE2410 buffer module for 24 VDC systems
13 November, 2013The FEAS SSE2410 buffer module is designed to help ensure a reliable and uninterrupted power supply, even during heavy network fluctuations, such as power brownouts.
Moore Industries low-voltage power supplies for CPA, CPA, ECT and TMZ
24 October, 2013Moore Industries has added low-voltage power supply options to many of its products, making them suitable for use in remote applications such as oil and natural gas wellheads where power supplies are limited.
Phoenix Contact CBB multichannel circuit-breaker boards
23 October, 2013The CBB multichannel circuit-breaker boards accommodate up to five devices for each protection path and thus help to reduce the installation effort.
DEHN + SOHNE DEHNvenCI combined lightning current and surge arrester
30 September, 2013The DEHNvenCI is a combined lightning current and surge arrester with a discharge capacity up to 25 kA and combines system protection and compact dimensions in a single device.
FEAS SNT15024-K switch mode power supply
05 September, 2013The FEAS SNT15024-K switch mode power supply is designed to withstand inadvertent polarity reversal while also providing an output that is protected from short circuit conditions.
Western Telematic NBB-20VD16-3 vertical mount switched PDU
28 August, 2013The Western Telematic NBB-20VD16-3 vertical mount switched PDU is a high-amp, switched PDU specifically designed to provide secure, remote power control and reboot capabilities for high-density rack enclosures.
Phoenix Contact Quint Oring active power redundancy module
09 July, 2013The Quint Oring active redundancy module for an output current of 80 A is an addition to Phoenix Contact’s line that already includes 20 and 40 A models.
Soanar SD Series enclosed AC/DC switchmode DIN rail power supplies
05 July, 2013The SD Series of switchmode DIN rail power supplies are suitable for the user who is looking for a power solution that offers high performance and efficiency with a two-year warranty.
Weidmuller VPU DC photovoltaic surge protection
19 June, 2013The VPU DC surge protection series has been specially designed for photovoltaic systems, and complies fully with both the latest international and local (AS/NZS 5033:2012) requirements.
Phoenix Contact Plugtrab PT-IQ surge protection devices
12 June, 2013Phoenix Contact’s Plugtrab PT-IQ surge protection devices provide intelligent monitoring of every voltage-limiting component of a protective circuit, and the push-in connection technology enables significantly faster wiring of the individual protection modules.
Phoenix Contact Uno Power power supplies for compact cabinets
11 June, 2013The high power density Uno Power supply units are designed to reliably supply loads of up to 100 W at 24 VDC or 12 VDC in compact control cabinets.
Weidmüller DC-UPS and buffer modules
13 May, 2013Weidmüller’s DC-UPS and buffer modules provide industry with solutions to overcome electricity supply interruptions from 200 ms to 40 A for 30 min enabling a high-reliability 24 VDC system.
