Wieland Electric wipos PB1 power supplies
20 December, 2010 byLow installation height and narrow installation spaces are often found in small distribution boards, shunting distributors and control cabinet applications.
FEAS SNT230-K series switch-mode power supplies
29 October, 2010 byThe switch-mode power supplies of the FEAS SNT230-K series are claimed to be powerful and robust devices for power-sensitive loads in industrial environments.
FEAS SNT50 series switchmode power supplies
20 July, 2010 byThe SNT50 series switchmode power supplies from FEAS are claimed to feature good radio shielding and high reliability integrated into a functional and stable casing.
FEAS SSE90 power supply with integrated buffer module
17 May, 2010 byThe FEAS SSE90 power supply with integrated buffer module combines a compact switchmode power supply with a maintenance-free buffer module that uses high-capacity double-layer capacitors as storage elements.
FEAS Accupack LDR4012 and LDR4024 buffered power supplies
24 March, 2010 byFEAS Accupack LDR4012 and LDR4024 are made with charging regulators and serve to buffer 12 and 24 V systems. The Accupack LDR is designed to be connected between the line voltage and the installation in order to provide DC to the equipment. In the event of a mains power failure, the onboard sealed batteries supply the system, connected to the outlet. The supply duration depends on the load current of the consumer. The batteries can be easily replaced if necessary.
Metal Work Pneumatic Pneumo-Power pneumatic power supply
10 March, 2010 byPneumo-Power is a product that incorporates an electric generator powered either by exhaust air (reduced environmental impact) or a compressed air supply to create 24 VDC locally where wiring may be costly or impractical to install.
Wago 857 Series Jumplex transducer and relay modules
07 February, 2010 byThe Wago 857 Series Jumplex transducer and relay modules have a compact design, with 6.0 mm width, and can operate over a temperature range from -25 to 70°C.
Prevent 24 VDC overloads from stopping production
30 January, 2010 by Kai BronzelAlong with the laws of physics, engineers have to be aware of the law of unintended consequences. Take, for example, something as simple as the 24 VDC power supplies that feed the control circuits in automation systems as a case in point.
Banner Engineering BWA-SOLAR-001 FlexPower solar supply
15 January, 2010 byBanner Engineering has released the FlexPower solar supply, BWA-SOLAR-001, specifically designed for powering SureCross wireless network devices.
Zener diode barriers
10 November, 2009 byTurck has introduced MZB series Zener diode barriers, designed to effectively limit excess energy before it reaches a hazardous area. The MZB barriers provide removable terminals within an efficient and space-saving design - with channels as small as 6.3 mm wide - to consume minimal panel space. Additionally, the MZB series features a bussed power feed and offers both relay and solid-state switch models.
DIN rail power supplies
29 September, 2009 byThe PBAMRÂ Series 10-92W is a range of Class II output DIN rail switching power supplies suited to building automation, factory automation, semiconductor fabrication equipment, marine installation and electromechanical applications with medium to high power demand. The series is available in 7.5, 15, 22.5 and 35 W models.
SDR-120 DIN rail power supply
29 September, 2009The Mean Well SDR-120 is an AC/DC isolation Class I DIN rail power unit.
Current loop isolators
21 August, 2009 byOmniflex has introduced three signal isolators in the Omniterm LZ series with integrated 10 kA 8/20 µs surge arrestors to cater for applications that require both loop isolation and surge protection. The LZ series combines both functions in under 12 mm per channel of DIN rail space.
Strain gauge signal conditioner
09 June, 2009Weidmüller’s ACT20P range of signal isolators now contains a strain gauge signal conditioner. The ACT20P-Bridge combines small size with state-of-the-art technology providing simple programming, non interacting calibration points plus front panel or external tare function.
Switchmode power supplies
18 May, 2009 byThe PRO-M range of switchmode power supplies offers space saving of up to 50% and no ventilation gap is required between multiple units, so that the PRO-M will squeeze into tight switchboards or machines.
