Phoenix Contact Plugtrab PT-IQ Ex IS surge protection system
Phoenix Contact’s PT-IQ Ex models from the self-monitoring Plugtrab PT-IQ surge protection system are specifically designed for intrinsically safe applications and can be installed directly in Ex zone 2. The intrinsically safe signal circuits can be routed up to Ex zone 0.
All protection systems consist of a controller and the protection modules themselves. The controller supplies power to up to 10 surge protection devices over mounting rail connectors and establishes contact to the multistage remote monitoring system. This means significantly less wiring is required than when using conventional installation techniques.
The intelligent monitoring of each voltage-limiting component in a protective circuit allows preliminary damage to be detected and this information to be displayed using a separate yellow status indicator. In this way, pre-damaged surge protectors can be replaced during routine maintenance before they fail.
Phone: 1300 786 411
FEAS SSE6030 DC supercapacitor UPS
FEAS GmbH is expanding its SSE30 series with the addition of the 60 V SSE6030...
Flir iXX-Series app-enabled thermal cameras
Built on the company's ACE platform, the iXX combines apps with a thermography inspection...
NORD UNICASE worm gear units with increased torque
NORD Drivesystems has increased the maximum torque of its UNICASE worm gear units.
Learn More
I am interested in Phoenix Contact Plugtrab PT-IQ Ex IS surge protection system.
Complete the form and a supplier representative will be in touch.
