Treotham Automation twistable fibre bus cables
17 September, 2010 | Treotham Automation Pty Ltd
Twistable fibre bus cables suitable for the most popular industrial bus systems (Profibus, CANbus, industrial ethernet) are now available from Treotham Automation. Torsion-resistant materials are used for the cable insulation, which is always extremely sensitive in such bus system cables. In addition, the cables are protected by damping elements and a matching PTFE gliding layer.
Aplex ACS-265X series embedded controllers
17 September, 2010 | Backplane Systems Technology Pty Ltd
The ACS-265X series (ACS-2653/2654/2655) from Aplex are a range of high-performance embedded controllers with fanless design that are suitable for use in noise-sensitive environments where the user requires a quiet workspace without compromising on performance.
Series PFT paddlewheel flow sensor
17 September, 2010 | Dwyer Omega (Aust) Pty Ltd
The Series PFT paddlewheel flow sensor is designed for monitoring liquid flow in 3.8 to 100 cm pipes. The insertion design allows one model to be used for the full pipe size capability.
Burkert Type 6144 flipper solenoid valve
10 September, 2010 | Burkert Fluid Control Systems
Type 6144 is a direct-action two- or three-way solenoid valve designed for neutral gases and liquids. Through the movement between the two end positions, the switching element (flipper) seals one of the two opposing valve seats and connects the other to the working port. This movement is caused by the solenoid’s magnetic field pushing a permanent magnet that is fixed to the flipper element.
Moxa NPort S8455I-MM-SC combination ethernet switch and device server
10 September, 2010 | CrispTech Pty Ltd
Moxa has released the NPort S8455I-MM-SC, the first model in the NPort S8000 series, which combines an ethernet switch and serial device server in a single unit with two fibre ethernet ports, three copper ethernet ports and four RS232/422/485 serial ports.
Allen-Bradley TÜV-certified e-stop buttons
10 September, 2010 | Rockwell Automation Australia
All styles of Allen-Bradley emergency-stop push buttons are now available with TÜV-certified B10d Functional Safety ratings. This provides users with published certified safety product data for calculating the safety level of their entire control safety system, helping to ensure control safety system reliability.
Pro-Face AGP3600-U1-D24-CA1M and AGP3650-U1-D24 sunlight-readable HMIs
10 September, 2010 | Pro-face Australia Pty Ltd
Pro-Face Australia has announced two 12.1″ sunlight-readable HMIs. The AGP3600-U1-D24-CA1M model is a CANopen master style HMI, capable of running ladder logic programs and controlling up to 510 digital I/O points. It can also run four third-party protocols simultaneously.
Endress+Hauser Liquistation CSF48 and Liquiport CSP44 samplers
06 September, 2010 | Endress+Hauser Australia Pty Ltd
The Liquistation CSF48 sampler and its portable version, the Liquiport CSP44, are designed for fully automated sampling of liquid media. They fulfil all international standards and legislation on water sampling while providing flexibility for different water applications including laboratory, sewage treatment and industrial processes.
National Instruments PXIe-4844 optical sensor interrogator
31 August, 2010 | National Instruments Aust Pty Ltd
The NI PXIe-4844 optical sensor interrogator is a two-slot 3U PXI Express module for fibre Bragg grating (FBG) sensors. FBG sensors operate by reflecting a wavelength of light that corresponds to changes in physical phenomena such as strain and temperature.
Circutor CVM-NRG 96 three-phase power analyser
23 August, 2010 | Eaton Electrical (Australia) Pty Ltd
The Circutor CVM-NRG 96 is a three-phase power panel analyser that displays and transmits all electrical parameters metered or calculated. It is suitable for supporting utility and commercial metering, power generation sites and campuses, sub-metering, load studies and voltage recording, as well as being an all-in-one analog meter replacement.
Penny+Giles JC1500 12-bit programmable joystick
23 August, 2010 | Control Devices Australia
Penny+Giles JC1500 is a robust, hand-operated, 12-bit, programmable joystick based on Hall-effect technology designed for single-axis operator control of cranes, aerial work platforms and other off-highway vehicle applications. The compact joystick comes with a range of user-defined features, enabling OEMs to quickly and efficiently build safe and reliable control systems.
Aplex Technology ACS-2674A fanless embedded controller
23 August, 2010 | Interworld Electronics and Computer Industries
The ACS-2674A is an Intel Core 2 Duo-based embedded controller from Aplex Technology. The ACS-2674A is a stand-alone embedded PC featuring fanless operation, compact size, robust construction and low power requirements.
Schaffner Sinusoidal FN5040/45 drive output filters
23 August, 2010 | NHP Electrical Engineering Products Pty Ltd
The Schaffner Sinusoidal FN5040/45 output filters are designed to ensure cooler and more reliable drives. As well as offering the capacity to prevent premature failures and expensive downtime, they are matched to the technical requirements of modern drive systems reducing the extra losses experienced in AC motors.
Tecpro Typhoon rotating cleaning head
23 August, 2010 | Tecpro Australia
The Typhoon rotating cleaning head is designed for large vessels, including food and beverage storage tanks, transport containers and chemical reactors, and produces four high-powered jets that give complete coverage in a quick seven-minute wash cycle. Even at high flow rates, the geared movement maintains an optimum jet peripheral velocity that increases impingement and chemical dwell times to maximise cleaning effectiveness. The Typhoon’s efficient wash cycle reduces downtime and saves on water and effluent costs.
Markem-Imaje 5800 hot melt ink jet printer
23 August, 2010 | Markem-Imaje Pty Ltd
The Markem-Imaje high-resolution, large-character 5800 hot melt ink jet printer provides clear, consistent text, graphics and GS1-compliant bar codes on cases, trays and shrink wraps. Suitable for corrugate printing applications, the printer can be easily integrated into existing production lines, carton erectors or tapers.
