Acrodyne Acro-Matic pneumatic actuators and accessories
03 November, 2010 | Acrodyne Pty Ltd
Acro-Matic pneumatic actuators and accessories cover a range of torque outputs from 5 to 5000 Nm with a rack and pinion drive mechanism. The actuator is claimed to provide long and reliable service as the power pack.
Hydac Precare diesel engine filtration system
03 November, 2010 | HYDAC International
The Hydac Precare diesel filtration system protects vehicle manufacturers and operators from failures, breakdowns and service interventions. Two versions of the cartridge filter system are available - manual water discharge and fully automatic discharge.
Vanton Sump-Gard model SGK PY800SP sump pump
01 November, 2010 | Acromet (Aust) Pty Ltd
The Sump-Gard model SGK PY800SP thermoplastic pump from Vanton features a close-coupled, cantilevered shaft that reduces headroom requirements and eliminates immersed bearings.
Gates Quad-Power III notched raw- edge narrow section V-belts
01 November, 2010 | Gates Australia Pty Ltd
Gates Quad-Power III is a range of notched raw-edge narrow section V-belts, designed to deliver higher power ratings, increased trouble-free service life and reduced energy consumption.
Watson-Marlow 520Bp, 620Bp and 720Bp Profibus-enabled pumps
01 November, 2010 | Watson-Marlow Fluid Technology Solutions
Watson-Marlow Pumps has launched three IP66-rated peristaltic pumps with certified Profibus DP networking capabilities, the 520Bp, 620Bp and 720Bp.
Exair Super Air Wipe
01 November, 2010 | Compressed Air Australia Pty Ltd
The Super Air Wipe from Exair produces a 360° airstream that can blowoff, dry, clean or cool the material passing through it. The split design can be clamped around continuously moving material such as wire, cable, pipe, hose and extruded shapes.
Beck drives electric actuators
01 November, 2010 | Acrodyne Pty Ltd
Beck drives are designed electric actuators that offer consistent, precise control without the performance and maintenance limitations of typical actuators. Unlike pneumatic and conventional electric actuators, the drives can withstand continuous duty modulation without degradation of performance. The electric actuators combine the positioning necessary for optimum control with the reliability to keep the process running.
ITT Lowara e-SV stainless steel, vertical multistage pumps
01 November, 2010 | Xylem Applied Water Systems Australia Pty Ltd
Lowara e-SV stainless steel, vertical multistage pumps are claimed to feature innovative hydraulic design and efficiency characteristics that significantly lower life-cycle costs, with increased energy savings and are suited for a wide variety of commercial and industrial applications.
Firestone 70-P-13 Airomatic polyactuators
01 November, 2010 | Air Springs Supply Pty Ltd
Tiny but robust pneumatic actuators are available from Air Springs that stand 16 mm high deflated and have a stroke of more than 12.5 mm.
Nexen RB series, Generation II linear profile guide rail brakes
29 October, 2010 | Norman G Clark Pty Ltd
Nexen Group has announced the RB series, Generation II linear profile guide rail brakes for stopping and holding in e-stop and power-off situations. The brakes deliver a high spring-engaged/air-released holding force, providing secure holding and fast response time for a broad range of linear motion control applications.
ORing-Networking IDS-5000 series industrial device servers
29 October, 2010 | Soanar Limited
ORing-Networking has upgraded the IDS-5000 series industrial device servers. The devices can be used to connect RS232/422/485 serial devices, such as PLCs, sensors, card readers, meters, motors and drives in industrial environments.
weber Sensors mini vent-captor type 3505/3022.30 airflow meter
29 October, 2010 | Automated Control Pty Ltd
The weber Sensors mini vent-captor type 3505/3022.30 is a remote airflow meter for industrial applications, suitable for small pipe sizes from ID 10 to 15 mm.
Banner Engineering Ez-Light K80 call light
29 October, 2010 | Micromax Pty Ltd
Banner Engineering has introduced the Ez-Light K80 call light, designed to optimise productivity in flexible manufacturing environments. The call light is a simple solution for keeping parts bins stocked and the assembly line productive: it emits a flashing red signal from a large 50 mm dome - visible from 180 degrees - to notify stocking personnel when parts bin supplies must be replenished. This notification ensures parts bins are refilled before supplies are gone, allowing assembly and manufacturing line operators to sustain production.
FEAS SNT230-K series switch-mode power supplies
29 October, 2010 | Automated Control Pty Ltd
The switch-mode power supplies of the FEAS SNT230-K series are claimed to be powerful and robust devices for power-sensitive loads in industrial environments.
Hirschmann Mach 100 workgroup switches
29 October, 2010 | Wired & Wireless Solutions International
The Hirschmann MACH 100 industrial workgroup switch is designed primarily for the control room environment.
