Fluke 810 vibration tester
03 November, 2011 byAvailable to rent, the Fluke 810 vibration tester can be used to test rotating machinery to determine the status of gearing wear, troubleshoot equipment to understand the cause of failure or commission new equipment.
FiberSensing FS 6500 single-axis fibre Bragg grating accelerometer
05 October, 2011 byThe FS 6500 single-axis fibre Bragg grating (FBG) accelerometer from FiberSensing is a fibre-optic version of the conventional accelerometer. Completely passive, with an intrinsically safe design, it offers inherent insensitivity to environmental-induced noise. The device is suitable for applications requiring the measurement of low frequency and small amplitude accelerations.
GE Energy Bently Nevada AnomAlert motor condition monitor
03 August, 2011 byPart of the Bently Nevada condition monitoring product line, AnomAlert uses motor voltage and current spectral analysis to provide predictive maintenance information for three-phase AC electric motors. Without the need for conventional monitoring sensors, the AnomAlert will detect mechanical and electrical anomalies in motor and machine train operation. Detailed information is presented by the AnomAlert standalone or System 1 software, which provides the user with an early warning of mechanical and electrical anomalies, recommendations for maintenance actions and a range of diagnostic analysis tools to verify and correct problems.
Pepperl+Fuchs F99 series acceleration sensors
19 July, 2011The F99 series acceleration sensors are suitable for monitoring severe vibration or acceleration in a plant. Their robust housing and non-contact measuring claim to reliably help users avoid critical situations, particularly important for large systems.
Dytran Instruments 3274A series piezoelectric accelerometers
14 July, 2011The 3274A series miniature, low-profile, IEPE piezoelectric accelerometers are designed to mount in spaces typically inaccessible to other types of accelerometers.
Fluke 810 vibration tester
11 July, 2011 byThe Fluke 810 vibration tester is designed to enable maintenance teams to rapidly collect data and diagnose and solve mechanical problems with an easy-to-use tool. It is designed and programmed to diagnose the most common mechanical problems of unbalance, looseness, misalignment and bearing failures in a wide variety of mechanical equipment, including motors, fans, blowers, belts and chain drives, gearboxes, couplings, pumps, compressors, closed coupled machines and spindles.
Honeywell OneWireless Rotating Equipment Solution
01 July, 2011 byHoneywell has launched its OneWireless Rotating Equipment Solution, a suite of products and services that forms part of Honeywell Process Solutions’ (HPS) Reliability and Asset Management portfolio. The solution is designed to provide a means to monitor essential and critical plant assets wirelessly and in real time, saving customers money through improved uptime and reduced maintenance and repair costs.
SEW-Eurodrive DUV30A vibration analysis sensor.
17 September, 2010 bySEW-Eurodrive has launched its updated vibration analysis sensor, the DUV30A. Replacing the company’s DUV10A sensor, the DUV30A features faster sampling time at a constant speed, allowing the monitoring of more dynamic gear-unit applications.
Siemens Sitrans WM100 heavy-duty motion-sensing switch
17 August, 2010 byThe Sitrans WM100 heavy-duty motion-sensing switch is designed to detect the absence or presence of motion on rotating, reciprocating or conveying equipment. The device acts as early warning systems to avoid process interruptions and equipment breakdowns. Located outside of the process, Sitrans WM100 accurately detects operating conditions without wear on the sensor.
Hydac CMU 1000 online condition monitoring unit
21 June, 2010 byThe CMU 1000 is an electronic evaluation unit for permanent online condition monitoring of machines and systems. Data recorded from sensors (processed or unprocessed) can be transferred by the device via different ports or as an analog value to other devices or monitoring levels.
Machines get health checks online
17 May, 2010Condition monitoring is a proven, valuable tool for optimising maintenance strategies. Ian Liebler, Rockwell Automation integrated conditioning monitoring solutions architect, explains how integrated condition monitoring can provide even greater production and maintenance efficiencies through streamlining real-time information flow.
FreeWave cathodic protection remote monitoring radio
15 February, 2010 byCathodic protection (CP) systems for storage tanks, pipes and other buried infrastructure are often located in remote locations, making them difficult to maintain and operate. Further, these systems are often prone to theft leaving miles of expensive metal unprotected.
Honeywell HPW7000 high-purity water measurement system
15 February, 2010 byHoneywell has announced it has added oxidation reduction potential (ORP) measurement - a key parameter for minimising corrosion in power plant equipment such as turbines and piping - to its HPW7000 high-purity water measurement system, which should enable plants to better maintain critical equipment, reduce capital expenses and lower chemical usage.
VK Series vibration switch
26 October, 2009The VK Series vibration switch from ifm efector is designed to continuously monitor the vibration levels of critical plant equipment to help prevent machine failure and expensive downtime. The compact VK switch is designed to permanently mount on a machine to provide continuous feedback of vibration level via a 4-20 mA analog output.
Triaxial accelerometer
21 September, 2009 byDytran Instruments has released a miniature triaxial accelerometer, utilising quartz shear technology, coupled with 2-wire internal IEPE electronics.