Westermo MR-270 mobile broadband router
06 September, 2011 | Supplied by: Madison Technologies
The Westermo MR-270 mobile broadband router is designed to eliminate the need for time-consuming site visits. It provides a network infrastructure suitable for industrial remote access using the internet. It provides users with access to SCADA systems, HMI and PLCs. The resilient network minimises downtime and dual SIMs provide high availability in critical situations. Fail-over technologies ensure high availability, as the MR-270 is easily integrated with external ADSL devices, Falcon and DR-260, allowing wired and wireless access.
Hirschmann ethernet switch software Release 7.0
30 August, 2011 | Supplied by: Belden Australia Pty Ltd
Belden has announced release 7.0 of its software platform for its Hirschmann product series, used in the MACH 100, 1000 and 4000, MICE, RS, RSR and Octopus families of managed switches.
Moore Industries HIX HART loop isolator
23 August, 2011 | Supplied by: http://www.miinet.com/products/sg_signal.shtml
The HIX HART loop isolator provides loop isolation while allowing the HART signal to pass through uninterrupted.
Planet POE-E201 PoE repeater
19 August, 2011 | Supplied by: CrispTech Pty Ltd
Planet POE-E201 is a device that extends both the reach of Gigabit Ethernet data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100 m Cat 5/5e/6 UTP cable to 200, 300, 400 and a maximum of 500 m.
Moxa VPort 461 industrial video server
18 August, 2011 | Supplied by: CrispTech Pty Ltd
Moxa’s VPort 461 industrial video server now complies with ONVIF, which allows the product to be easily integrated with any existing IP-based security system, enhancing interoperability and deployment flexibility. ONVIF (Open Network Video Interface Forum, www.onvif.org) is a non-profit organisation that aims to develop a global open standard for the interface of IP-based security products.
Hirschmann MACH104-16TX-PoEP ethernet switches
17 August, 2011 | Supplied by: Belden Australia Pty Ltd
The Hirschmann MACH104-16TX-PoEP ethernet switches provide PoE+ capability in accordance with IEEE 802.3at standards. The switch can power 16 ports at 15.4 W or 8 ports at 30 W each, enabling users of industrial ethernet to take advantage of PoE devices.
Harvest time
12 August, 2011 | Supplied by: ABB Australia Pty Ltd
Energy harvesting is the process by which energy (ambient, motion, wind, light), derived from external sources, is captured and stored to supply power for low-energy electronics. Ambient energy is available in abundance in the process industry and it is here that energy harvesting is beginning to make its mark.
Beckhoff EL6631-0010 Profinet terminal for EtherCAT
19 July, 2011 | Supplied by: Beckhoff Automation Pty Ltd
Beckhoff is expanding its product range for the EtherCAT I/O system with the EL6631-0010 Profinet terminal which, as a gateway from EtherCAT to Profinet RT, connects two real-time ethernet bus systems with one another.
Moxa IMC-21A industrial ethernet-to-fibre media converter
18 July, 2011 | Supplied by: CrispTech Pty Ltd
The Moxa IMC-21A industrial ethernet-to-fibre media converter converts from 10/100BaseTx to 100BaseFx and is designed to meet the needs of critical applications - it can operate reliably and stably in a wide temperature range of -40 to 75°C and is housed in a rugged metal case.
Moxa PT-508/510 series IEC 61850-3 substation switches
08 July, 2011 | Supplied by: CrispTech Pty Ltd
The Moxa DIN-Rail PT-508/510 series IEC 61850-3 substation switches offer a -40 to 85°C operating temperature range, and redundant features that tackle specific needs and requirements found in power substations.
Pepperl+Fuchs intrinsically safe transmitter power supplies
07 July, 2011 | Supplied by: Pepperl+Fuchs (Aust) Pty Ltd
Pepperl+Fuchs has released four transmitter power supplies for intrinsically safe applications up to SIL3. The transmitter power supplies for the K- and H-Systems have each been extended to include two additional modules that are designed for intrinsically safe applications up to SIL 3 according to EN61508. The advantage of these supplies is that only a single transmitter is required to construct an intrinsically safe signal circuit for SIL 3. Previously for SIL 3 this was only possible using two separate inputs, both of which had to be monitored for redundancy reasons. Internal diagnostic functions are also signalled via a single output and red LED, and prescribed test intervals can be extended for SIL 2 applications.
Quatech Airborne wireless ethernet bridges and routers
05 July, 2011 | Supplied by: Interworld Electronics and Computer Industries
Interworld has expanded its range of Quatech ethernet-to-Wi-Fi products.
GarrettCom Magnum 10ETS ethernet terminal server
02 July, 2011 | Supplied by: Madison Technologies
The GarrettCom Magnum 10ETS ethernet terminal server provides up to eight ethernet ports or up to 32 serial ports for protection, SCADA devices and IRIG-B time coding, and is suitable for large substation installations with large numbers of serial instruments.
MooreHawke Trunksafe Fault-Tolerant Fieldbus System
29 June, 2011 | Supplied by: http://www.miinet.com/moorehawke
The Trunksafe Fault-Tolerant Fieldbus System from MooreHawke protects against single points of failure.
Achieving next-generation connectivity
15 June, 2011 | Supplied by: Belden Australia Pty Ltd
Industrial ethernet impacts every aspect of the operation. Building a strong industrial ethernet system and harnessing the power of its wireless component can reap unanticipated benefits for the entire facility.
