Industrial networks & buses > Interfaces, gateways & device servers

Beckhoff EK9160 IoT bus coupler

24 May, 2016

The EK9160 IoT bus coupler transmits all control data to all common cloud systems in plug-and-play mode to enable simple and standardised integration of I/O data with cloud-based communication and data services.


HMS Industrial Networks Serial EtherNet/IP Linking Device

19 May, 2016

The Serial EtherNet/IP Linking Device allows users to connect any serial device to a Rockwell ControlLogix or CompactLogix PLC. It is fully integrated with Rockwell's Studio5000 Logix Designer.


Beckhoff EL3751 EtherCAT Terminal

04 May, 2016

The EL3751 EtherCAT Terminal permits 10,000 samples/s, a measurement accuracy of ±0.01% and 24-bit resolution.


Advantech IoT Gateway Starter Kit

04 May, 2016

The Advantech IoT Gateway Starter Kit includes a ready-to-run system, an IoT software platform service, a software development kit and technical support services.


HMS Anybus .NET gateways

22 April, 2016

Anybus .NET gateways enable real-time data from industrial machinery to be presented to .NET-based IT applications.


Red Lion E3 I/O module platform

13 April, 2016

Red Lion's E3 I/O module platform is a high-density I/O system with hardened metal enclosures and multiple communication options.


Wieland Wienet VPN industrial router

12 April, 2016

The Wienet VPN industrial router allows the user to perform remote management, remote maintenance and alarming from a distance.


AAEON AIOT-QA, AIOT-QG and AIOT-QM IoT gateways

30 March, 2016

The AIOT-QA, AIOT-QG and AIOT-QM IoT-specific gateways are created and built to enable IoT applications both indoors and outdoors.


ZigSense model ZS3G-SMS-P2P cellular network controllers

18 March, 2016

The ZigSense model ZS3G-SMS-P2P is a cable replacer matched pair cellular network controller designed to transfer digital on/off commands between two remote sites where the distance between the two sites is extremely far.


Turck IMX12 series intriniscally safe interfaces

01 March, 2016

The IMX12 interface series is an intrinsically safe line of devices that offers maximum signal density within a 12.5 mm housing.


ICP DAS ET-2260 IP-based Ethernet I/O monitoring and control module

24 February, 2016

The ICP DAS ET-2260 IP-based Ethernet I/O monitoring and control module can be remotely controlled through a 10/100 Mbps Ethernet network via Modbus TCP/UDP protocol, making it easy to integrate within HMI, SCADA and PLC-based systems.


HYDAC CSI-B-2 condition monitoring interface module

28 January, 2016

The CSI-B-2 is an all-purpose electronic instrument for converting the HSI signal from HYDAC SMART sensors into a standardised PC signal.


Balluff IO-Link sensor/actuator hub with expansion

21 January, 2016

With the latest Balluff IO-Link actuator/sensor hubs, slot 7 can be reconfigured as an expansion port by means of a simple parameter entry, so that a complete valve plug or an additional sensor hub can be connected to it.


AMCI ANE2 SSI interface module

12 November, 2015

Advanced Micro Controls Inc. (AMCI) has announced the addition of the ANE2 SSI interface module to its AnyNET I/O range.


HMS Industrial Networks Anybus X-gateway for Profibus/Profinet

29 October, 2015

Anybus X-gateways can now offer ways to get heterogeneous PROFI-equipment connected, enabling communication between different physical formats or to couple/decouple I/O data between two controlling networks.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd