B&B Electronics UHR401 and UHR402 USB isolators
17 July, 2014The UHR Series provides 4 kV isolation between upstream and downstream USB ports to protect expensive equipment from dangerous ground loops and voltage transients.
Acromag BusWorks XT1210 and XT1220 Ethernet I/O modules
01 July, 2014The XT1210 and XT1220 models provide an 8-channel interface for analog voltage or current input signals and EtherNet/IP, Modbus/TCP, Profinet or peer-to-peer communication.
Phoenix Contact optical converters and copper repeaters with DNV approval
20 June, 2014The optical converters and copper repeaters of Phoenix Contact's PSI and PSM product ranges now have DNV approval, so that they can be used in the maritime sector, such as in shipbuilding or offshore facilities.
Peak Systems PCAN-Gateway range of CAN to LAN gateways
02 June, 2014The PCAN-Gateway range allows the connection of different CAN buses over wired or wireless networks.
Moxa ioLogik W5340-HSPA cellular remote I/O device
22 May, 2014The ioLogik W5340-HSPA is equipped with a cellular interface that supports both five band UMTS/HSPA+ and quad-band GSM/GPRS/EDGE functionality.
Phoenix Contact SHDSL surge protection
09 May, 2014Phoenix Contact has launched a protection device for SHDSL systems designed to meet the special requirements of SHDSL data transmission.
Red Lion Data Station Plus ZR Series protocol gateway
20 February, 2014The Red Lion Data Station Plus ZR Series offers protocol conversion, data logging and remote machine access at processing speeds six times faster than previous versions.
Schneider Electric ConneXium Tofino Firewall with Ethernet/IP DPI
11 February, 2014Schneider Electric has expanded its ConneXium network and security product with the addition of EtherNet/IP Deep Packet Inspection (DPI) to the ConneXium Tofino Firewall.
Acromag TT230 and TT330 series signal conditioners
08 January, 2014The Acromag TT230 and TT330 series isolated signal conditioners feature high-density mounting on DIN rails, supporting RTD/resistance and potentiometer/thermistor input signals.
Phoenix Contact Rifline industrial relay system
06 December, 2013The Rifline complete industrial relay system has now received CSA certification and has been approved as a UL-compatible component.
Phoenix Contact RAD-PT100-4-IFS PT100 expansion module
04 December, 2013The RAD-PT100-4-IFS PT100 expansion module facilitates the transmission of up to four PT100 signals within the Radioline wireless system, and can be used to measure temperatures ranging from -50 to +250°C.
Secomea secure remote access
15 October, 2013Secomea's centrally managed authentication via a cloud service means that a secure connection can be made between authorised users and devices, without worrying about IP addresses, VPN protocols, TCP ports or encryption settings.
RS485 data acquisition: a new chapter
02 October, 2013 by Steve Huang and Wayne Chen, Moxa IncRS485 and ethernet are two commonly adopted communication interfaces used in data acquisition and control systems. Ethernet I/O devices are generally considered more sophisticated, RS485 I/O devices may be sufficient for budget-conscious system integrators. Nonetheless, there are still ways device manufacturers can improve on the lasting legacy of RS485 data acquisition devices.
Artila Electronics RIO-2010 web-based remote I/O control module
26 August, 2013The Artila Electronics RIO-2010 web-based remote I/O control module is designed for simple, stable performance, and supports Modbus protocols.
Turck BL20 Modbus I/O gateway
26 July, 2013Turck has expanded its BL20 I/O system with a gateway for serial Modbus communication, supporting both Modbus RTU as well as the ASCII protocol over RS485 and RS232.