Equipment > Test equipment & calibrators

Is it a leak? Understanding the adiabatic process in pressure calibration

21 February, 2024 by Heikki Laurila, Product Marketing Manager, Beamex

The adiabatic process is a physical phenomenon that can make us think our pressure calibration system is leaking.


IKM Instrutek TC65 temperature calibrator

02 January, 2024

The calibration interval of the TC65 temperature calibrator has been extended to up to three years.


Delta Ohm (Italy) LPPYRA-Lite Pyranometer

01 November, 2023

Delta Ohm (Italy) has released the LPPYRA-Lite Pyranometer for small-scale PV monitoring and general solar radiation measurements.


Mensor model CPC3050 pressure controller

08 August, 2023

The Mensor model CPC3050 high-speed pressure controller from WIKA can perform end-of-line three-point verification in 10 s.


EXAIR model 9207 ultrasonic leak detector

12 July, 2023

The updated model 9207 ultrasonic leak detector offers a heightened ability to detect leaks in hard-to-reach areas.


Ralston Instruments Quick-test hose reel

01 May, 2023

The heavy-duty, high-pressure Quick-test hose reel is designed to keep Quick-test hoses organised and off the ground.


Ovarro introduces tablet-based leakage detection

06 April, 2023

The ability to access network information on tablets and smartphones is another step forward in the digitalisation of the Australian water sector, according to Ovarro.


Vaisala Indigo80 Handheld Indicator

17 March, 2023

The Indigo80 Handheld Indicator is designed for industrial spot checking, short-term data logging, field sampling, data analysis and diagnostics.


Pepperl+Fuchs modular IC-HH5 RFID handhelds

03 March, 2023

Pepperl+Fuchs' modular IC-HH5 RFID handhelds offer a portable and flexible solution for writing and reading different frequency RFID transponders.


Mixing or diluting gases for multipoint calibrations

01 February, 2023

GasMix products enable multipoint gas calibrations by mixing or diluting several calibration gases.


Ralston Instruments calibration manifold

01 December, 2022

The Ralston calibration manifold is a handheld compressed gas controller that makes it possible to fine-tune pressure directly at the device under test.


Ralston Instruments pressure/vacuum calibration test pumps

11 July, 2022

Ralston Instruments pneumatic pressure/vacuum calibration test pumps are designed to generate low pressure up to 125 psi or draw a vacuum to -15 psi.


Fluke 28 II EX multimeter

01 July, 2022

The Fluke 28 II EX multimeter is available with different approvals, from ATEX to IECEx to NEC.


EXAIR Intellistat Ion Air Gun

01 July, 2022

The Intellistat Ion Air Gun is a handheld and lightweight solution to static elimination in clean processes or sensitive assembly work.


Ovarro Eureka5 tablet-based leakage detection system

03 June, 2022

The Eureka5 leak noise correlator displays information on an Android tablet and does not require a dedicated processor or laptop.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd