Equipment > General purpose pumps

SPX FLOW appoints Dynapumps as channel partner in Australia

16 December, 2019

Dynapumps will market SPX Flow's APV brand pumps, valves and mixers as well as WCB brand pumps and valves in Queensland, Victoria and Western Australia.

Alfa Laval LKH Prime 40 self-priming pump

17 July, 2019

Alfa Laval's LKH Prime 40 hygienic self-priming pump is claimed to offer high energy efficiency and versatility, as well as allowing for significantly reduced noise levels and easy maintenance.

SPX Flow Plenty TMH side-entry mixer

11 July, 2019

Storage of crude oil results in the settlement of bottom sludge and water, which needs to be removed regularly.

Alfa Laval twin screw pump

08 May, 2019

The Alfa Laval twin screw pump is designed for handling fluids that are sensitive, abrasive and either high or low viscosity.

Sea-Lix POGMO turbines

02 November, 2018

The POGMO is a pico-turbine from Sea-Lix that provides off-grid power to smart water networks.

SPX Flow CombiProLine OH3 vertical pump

26 October, 2018

SPX Flow has introduced the CombiProLine OH3 vertical pump for applications that demand a small footprint without compromising performance.

Aussie pressure test gear exported to Middle East

16 February, 2018

Australian Pump Industries has announced a major contract for supply of 500 bar hydrostatic test gear for the Middle East.

Bredel pumps provide hygienic solutions at Russian food plant

18 December, 2017

A global brand sauce and condiments manufacturing plant in Russia needed to replace pumps that were proving difficult to clean and maintain, being used to pump products that include cheese sauce, tomato ketchup and mayonnaise.

Tsurumi KTZ615 high head submersible pump

06 October, 2017

The Tsurumi KTZ615 uses a 15 kW motor to achieve higher head performance of 55 m with a maximum flow of 2800 L/min.

Alfa Laval SRU rotary lobe pumps

02 March, 2017

Alfa Laval SRU rotary lobe pumps are suitable for industries which require contamination-free pumps to meet high standards of hygienic, low-shear, low-pulsation operation.

Watson-Marlow 530 peristaltic cased pumps

24 March, 2016

Watson-Marlow Fluid Technology Group has introduced the 530 peristaltic cased pump for metering and transfer applications such as surface coating, printing and lime addition.

Australian Pump Industries I Series stainless steel pump

16 October, 2015

The I Series pump is an extension of Australian Pump Industries' range of pumps designed for a wide range of potentially corrosive or difficult-to-handle liquids.

Tsurumi Pump stainless steel mine dewatering pumps

25 September, 2015

Tsurumi Pump has released a range of all stainless steel pumps designed for mine dewatering applications.

Bete TurboMix eductor mixing nozzle

31 March, 2015

Inherently clog resistant, the Bete TurboMix eductor nozzle provides an effective, economical solution for circulating liquids in closed or open tanks.

Tsurumi LH4110-W submersible dewatering pumps

15 August, 2014

The LH4110-W can achieve up to a 200 m total head while providing a 1000 L/min maximum flow, but is only 592 mm in diameter.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd