Recirculating spreader-feeder
21 September, 2009 | Flexicon Corporation (Australia) Pty Limited
The recirculating spreader-feeder from Flexicon evenly distributes powder and bulk coatings onto food products as they pass between the unit’s longitudinal discharge hopper and its lower collection hopper.
Pneumatic cylinder position sensors
21 September, 2009 | SICK Pty Ltd
The MZT8, MZ2Q and MPS series magnetic cylinder sensors are designed to meet the needs of numerous automation requirements that use pneumatic cylinders.
Safety light curtains
21 September, 2009 | Micromax Pty Ltd
The first and last beams of the Banner Engineering EZ-Screen Low Profile (LP) safety light screens are positioned at the ends of the light screen, delivering continuous detection along the entire light screen length and eliminating the dead zones found on traditional safety light curtains.
Drives
21 September, 2009 | ABB Australia Pty Ltd
The ACS850 drive features an in-built, energy-saving calculator, embedded Modbus and drive-to-drive link, intelligent user interface with a series of assistant wizards, integrated safety functions, modular hardware and software, and a removable memory unit.
Pressure controller
21 September, 2009 | Dwyer Omega (Aust) Pty Ltd
The Series EDA electronic pressure controller is a compact package that can replace a separate gauge, two switches and a transmitter in a system saving money, installation time and panel space.
Pressure data logger
21 September, 2009 | Dwyer Omega (Aust) Pty Ltd
The Series DLI2 accurately records pressure and gives instant remote readings. The large, backlit LCD and 8-button keypad provide convenient access to current data and recorder set-up as well as memory and battery levels.
I/O expansion modules
21 September, 2009 | Micromax Pty Ltd
Unitronics has released a line of enhanced I/O expansion modules. Based on the same platform as the previous modules, these four compact devices offer up to 32 digital I/Os per unit, plus three additional analog inputs for maximum I/O capacity and minimised cabinet space.
Venturi flowmeter
21 September, 2009 | Dwyer Omega (Aust) Pty Ltd
Dwyer Instruments has released a Venturi flowmeter with a Magnehelic gauge that is designed to measure the flow of compatible gases while keeping the pressure drop through the meter at a minimum.
Compressed air audit system
21 September, 2009 | Hitachi Global Air Power
Champion Compressors has introduced AirMetrix System Assessment, a measurement and analysis tool intended to help industry identify areas of waste in compressed-air systems, and facilitate the implementation of targeted improvement measures.
Multispectral camera system
21 September, 2009 | SciTech Pty Ltd
The FluxData FD-1665 is a 3-CCD multispectral camera system that can be customised in various ways. The camera is offered in a range of resolutions utilising 1.4, 2 and 5 Mp sensors.
Non-contact infrared temperature sensors
21 September, 2009 | OneTemp Pty Ltd
The PyroCouple series is a range of high-quality, low-cost, compact sensors which measure the temperature of inaccessible or moving objects and materials. They can measure temperatures from -20 to 500 °C, accurately and consistently, with a response time of 240 ms.
Triaxial accelerometer
21 September, 2009 | Metromatics Pty Ltd
Dytran Instruments has released a miniature triaxial accelerometer, utilising quartz shear technology, coupled with 2-wire internal IEPE electronics.
Interface modules with FDT/DTM
21 September, 2009 | Turck Australia Pty Ltd
To simplify device set-up and installation time, Turck’s interface module (IM) family may now be programmed via a PC or onboard push-buttons using FDT/DTM software, along with PACTware.
Displacement sensors
21 September, 2009 | SICK Pty Ltd
The OD Value series displacement sensors offer four different measurement ranges from 26-34 mm to 60-180 mm and resolutions between 2 and 30 µm. The devices are capable of precisely measuring the position of bright, dark or highly reflective objects.
Retractable sensor fitting
21 September, 2009 | Yokogawa Australia Pty Ltd
The Yokogawa PR10 is a retractable sensor fitting that offers a flexible approach to online liquid analytical measurements in a wide range of process industries, and has been designed for online applications where the sensor has to be removed safely without interrupting process continuity in anaerobic, toxic or pressurised environments. The PR10 is suited to pH, ORP, conductivity, inductive conductivity and dissolved oxygen measurements.
