Pro-Face GP4100 series monochrome HMIs
24 March, 2010 | Pro-face Australia Pty Ltd
Pro-Face has introduced the GP4100 series HMI. These 3.4″ STN monochrome touch screens have a pixel resolution of 200 x 80. The HMIs can be used in either landscape or portrait mode and are only 28 mm thick.
The MathWorks Simulink PLC Coder
24 March, 2010 | MathWorks Australia
The MathWorks has announced Simulink PLC Coder, a product that generates IEC 61131 structured text for programmable logic controller (PLC) and programmable automation controller (PAC) devices. This advancement enables model-based design for manufacturing and power generation equipment controlled by PLCs and PACs.
Siemens Sitrans WW300 weighfeeder
24 March, 2010 | Siemens Ltd
Siemens has developed a heavy-duty weighfeeder for high capacities up to 800 TPH (tons per hour). The Sitrans WW300 weighfeeder is designed to provide consistent and accurate results in the control of continuous in-line weighing and feeding applications. The area of application ranges from agricultural to the cement industry.
Boge ED series refrigerant dryers
24 March, 2010 | Boge Compressors (Australia) Pty Ltd
One of the most economic methods of treating compressed air is with a refrigerant dryer. By cooling the compressed air down to near freezing point, the water and oil vapour are condensed and particles of dirt are bound together and resulting condensate is then separated from the air flow. In most cases, the pressure dewpoint need only be a few degrees lower than the ambient temperature to prevent condensate from forming in the pipes.
SEW-Eurodrive KES37 and RES37 stainless steel gear units
24 March, 2010 | SEW-Eurodrive Pty Ltd
At National Manufacturing Week 2010, drive solutions group SEW-Eurodrive will launch the KES37 and RES37 stainless steel gear units. Based on the proven design of the existing 7-series gear unit range, these two additions feature casings and shafts made from stainless steel, with an suitable enclosure for washdown applications. The KES37 and RES37 models are suitable for aseptic applications where caustic/high-pressure washdowns are required, or where there is potential for product contamination.
Fisher DVC6200 series digital valve controller
24 March, 2010 | Emerson
Emerson Process Management has expanded its Fieldvue instrument product line with the Fisher DVC6200 series digital valve controller, featuring linkageless, non-contact feedback technology.
SprayLogic MVHP series spray tips
24 March, 2010 | SprayLogic
SprayLogic has announced that it has added high-pressure spray tips to its range of high- and low-pressure spraying equipment. The MVHP Series, these spray tips are built using a design and manufacturing approach that is intended to ensure accuracy and provide consistent durability and performance for all types of high-pressure applications.
Hydac AutoFilt RF3 automatic backflushing filter
24 March, 2010 | HYDAC International
The AutoFilt RF3 automatic backflushing filter is designed for continuous filtration applications, including those in power stations, chemical and steel industries, in sewage treatment plants and environmental technology.
Rotex minerals separators
24 March, 2010 | iBulk Solutions Pty Ltd
iBulk has announced the addition of the Rotex mineral separator and Megatex XD to their product range. Three model series are available for a variety of general purpose and finer process screening applications.
EVOC PMM-1513 automation process supervisory computer
24 March, 2010 | Backplane Systems Technology Pty Ltd
The PMM-1513 from EVOC is an automation process supervisory computer specifically designed to meet requirements of harsh industrial environments.
VarTech VT500ESW purged workstation computer system
24 March, 2010 | Unitronix Pty Ltd
VarTech’s VT500ESW is a rugged, purged workstation computer system, with integrated LCD, built for areas classified as Class 1/Division 2 hazardous areas. The purge system uses an automatic pressure switch to automatically trigger alarms in case of pressure loss. These hazardous area computers will not cause conditions that may result in an unstable environment.
Rotork CVA electric valve actuators
24 March, 2010 | Rotork Australia
The Rotork CVA range of electric actuator is designed to provide continuous, repeatable modulating control with a programmable fail-to-position option. Operating on a 4-20 mA control signal or digital bus, the resolution, repeatability and hysteresis performance of the CVA is quoted at <0.1% of full scale.
Allen-Bradley 193-EC5 E3 Plus solid-state overload relay
24 March, 2010 | Rockwell Automation Australia
The Allen-Bradley 193-EC5 E3 Plus solid-state overload relay features voltage protection and energy monitoring. Part of the E3 Plus family, the overload relay combines current and voltage protection with enhanced power monitoring and diagnostic capabilities.
AMS Vortab Insertion Panel flow conditioner
22 March, 2010 | AMS Instrumentation & Calibration Pty Ltd
The VIP (Vortab Insertion Panel) flow conditioner is designed to completely neutralise flow profile irregularities caused by elbows, valves, blowers, compressors and other flow disturbances that commonly occur in piping and duct runs and cause flowmeter inaccuracies. The VIP provides a swirl-free, symmetric and repeatable flow profile that flowmeters require for accurate measurement. They are designed for pipe diameters larger than 50 mm.
Moxa IKS-6500 range of rackmount ethernet switches
22 March, 2010 | CrispTech Pty Ltd
Moxa has introduced the IKS-6500 range of industrial rackmount ethernet switches that support flexible copper/fibre configuration with gigabit uplinks, reliable media and power redundancy, advanced network management functionality and industrial rugged design.
