West Control Solutions eCAL controller
14 October, 2010 | Automated Control Pty Ltd
The West Control Solutions eCAL controller has a 1/8 DIN (98 x 48 mm) format with reduced behind-panel depth of 70 mm, and a universal input for all sensor types, allowing flexible utilisation, two or three outputs (including relay, SSR driver, linear DC and RS485) and full PID control.
ORing IES-3073GC managed redundant ring ethernet switch
14 October, 2010 | ICP Electronics Australia
The IES-3073GC from ORing is a managed redundant ring ethernet switch equipped with seven 10/100baseTx ethernet ports and three Gigabit combo ports.
Kontron MicroTCA platform OM6040D high-density backplane system
14 October, 2010 | Kontron Australia Pty Ltd
The compact MicroTCA platform OM6040D is designed for up to four high-end AdvancedMCs and features a 10 Gbps ethernet switched backplane, enabling high data flow rates. In the maximum configuration with four Kontron AM5030 processor modules, the 5U platform hosts up to 16 Intel Xeon processor cores and 96 GB of RAM.
Hart 9150 thermocouple furnace
11 October, 2010 | TechRentals
Available to rent, the Hart 9150 thermocouple furnace can be used to check industrial thermocouples and RTD temperature probes up to 1200°C.
Bestech thermoMETER CT M3 infrared temperature sensor
11 October, 2010 | Bestech Australia Pty Ltd
The thermoMETER CT M3 is an infrared temperature sensor that provides accurate temperature measurements for metals, secondary metal processing and ceramic materials. It has a temperature range of 50 to 600°C and the unit can be used in ambient temperatures of 85°C without cooling.
SMC IZN10 nozzle-type ionisers range
01 October, 2010 | SMC Australia | New Zealand
The IZN10 range of nozzle-type ionisers is designed to remove the static charge (often many thousands of volts) from small work pieces and products. Generating ions at a rate of 60 kHz, the unit can render a static charge on plastic, paper, films, powder, electrical components, glass and plastic lenses, metals and other materials to an ion balance of ±10 V or less. Fast elimination of static electricity removes the potential for damage, dust adhesion or other problems.
Burkert Element neutrino analytical transmitters
01 October, 2010 | Burkert Fluid Control Systems
Element neutrino analytical transmitters are designed for use with different sensor types. The modular transmitters can be adapted to different applications and used for measuring pH, ORP or conductivity.
Furness Controls FCO332 differential pressure transmitter
01 October, 2010 | Bestech Australia Pty Ltd
The FCO332 differential pressure transmitter from Furness Controls is designed for air-handling applications as well as glove boxes and clean rooms. It allows easy reconfiguration and provides various voltage outputs along with standard 4-20 mA.
Burkert 2000 Inox angle seat valve and modular block system
01 October, 2010 | Burkert Fluid Control Systems
The pneumatically operated 2000 Inox angle seat valve consists of a pneumatic piston actuator and a 2-way valve body. Both parts are manufactured from 316L stainless steel and therefore can be used with media at temperatures of up to +180°C.
National Instruments VeriStand 2010 testing environment
01 October, 2010 | National Instruments Aust Pty Ltd
National Instruments has announced NI VeriStand 2010, which includes enhancements that expand its capabilities for hardware-in-the-loop (HIL) and real-time testing by supporting high-performance, multiple chassis PXI systems and low-cost, ruggedised options using NI CompactRIO and NI Single-Board RIO hardware deployments. NI VeriStand 2010 also features enhanced connectivity with NI LabVIEW, making it easier for engineers to re-use existing software and further customise their VeriStand applications.
Vega DTM Collection 07/2010 with PACTware 4.0
23 September, 2010 | VEGA Australia Pty Ltd
Vega has released its DTM Collection 07/2010 that includes PACTware 4.0 as well as new device drivers and functional extensions for various sensors. Parallel to the introduction of enhanced instrument functions, the company brings out a new release of its DTM Collection every year. The collection also contains PACTware 4.0.
AST4500/4510 submersible pressure sensor
23 September, 2010 | Bestech Australia Pty Ltd
The AST4500/4510 submersible pressure sensor from American Sensor Technologies is a high-accuracy, fully stainless steel media isolated pressure transducer intended for use in the measurement of liquids compatible with stainless steel, polyurethane and polyolefin. The pressure sensor is suitable for industrial and water management applications, including liquid tank level, ground water level and depth measurement, petrol fuel tanks, earthen and concrete dams and wastewater canals.
Vega Vegapuls WL 61 radar sensor for water and sewage
23 September, 2010 | VEGA Australia Pty Ltd
The Vegapuls WL 61 radar sensor has been developed especially for the area of water and sewage systems as an alternative to the commonly used ultrasonic sensors and hydrostatic pressure transmitters.
Vega Vegascan 693 universal signal conditioning instrument
23 September, 2010 | VEGA Australia Pty Ltd
Vegascan 693 is a universal signal conditioning instrument for level and process pressure measurements. Besides providing signal connections for up to 15 HART sensors, it enables simple set up and commissioning of the sensors from the switch room.
Maestro-Wireless Maestro 3G industrial router
20 September, 2010 | Wired & Wireless Solutions International
The Maestro-Wireless Maestro 3G industrial router is designed to allow fast connectivity to the internet, to back-end applications or to other devices. It is a GPRS/EDGE/UMTS/HSPA+ wireless single-port router for fast wireless IP connectivity.
