Phoenix Contact Quint Power dip-coated power supply units
11 November, 2011 | Phoenix Contact Pty Ltd
The dip-coated Quint Power power supply units have an adjustable output voltage from 18 to 29.5 VDC, output currents of 5, 10, and 20 A and are capable of tolerating 100% humidity.
Lafert Scorpion IP66 stainless steel motor and gearbox
10 November, 2011 | Lafert Electric Motors
The Scorpion IP66 stainless steel motor is available in IP67 submersible, 71 up to 100 frame, 2- and 4-pole versions.
Honeywell 854 Servo level gauge with enhanced overfill detection
08 November, 2011 | Honeywell Process Solutions
Honeywell has announced key enhancements to its 854 Servo level gauge, which is now equipped with a Servo Auto Test feature. This solution has been approved for Safety Integrity Level-2 and 3 (SIL-2/SIL 3) applications and increases the gauge’s diagnostic coverage.
Mettler Toledo ISM technology
07 November, 2011 | Mettler-Toledo Ltd
ISM (Intelligent Sensor Management) technology from Mettler Toledo is designed to allow users of process analytical equipment to reduce the maintenance costs of loops, while increasing the safety of the production process. Sensors equipped with ISM are continuously monitored for defects and wear to anticipate failure before it happens.
Mettler Toledo M800 multichannel, multiparameter transmitter
04 November, 2011 | Mettler-Toledo Ltd
The Mettler Toledo M800 is a multichannel, multiparameter analytical transmitter line. The series operates with Intelligent Sensor Management (ISM) sensors for pH/ORP, conductivity/resistivity, oxygen (dissolved as well as gas) and ozone. Up to four channels are available for measurement of any combination of the above parameters, plus inputs for flow.
Vega WeighTrac radiation-based belt weigher
03 November, 2011 | VEGA Australia Pty Ltd
WeighTrac is a radiation-based sensor for precise determination of the feed rate of bulk solids. It measures contactlessly with the help of gamma radiation and is suitable for mass flow measurement on conveyers. Its frame construction allows simple installation and retrofit.
Fluke 810 vibration tester
03 November, 2011 | TechRentals
Available to rent, the Fluke 810 vibration tester can be used to test rotating machinery to determine the status of gearing wear, troubleshoot equipment to understand the cause of failure or commission new equipment.
CalAmp Viper SC radio modems
02 November, 2011 | Telephus Pty Ltd
CalAmp Viper SC radio modems deliver up to 48 Kbps IP over narrowband UHF and VHF channels allowing secure data from field assets to the company LAN.
Crystal nVision Pressure Calibrator 30 bar
02 November, 2011 | TechRentals
The Crystal nVision Pressure Calibrator 30 bar is an intrinsically safe NATA-certified pressure calibrator. It displays real-time recorded data graphically on a high-resolution screen and can be used to download the data during testing.
Advantech WebOP-2000 widescreen HMI panels
02 November, 2011 | Advantech Australia Pty Ltd
Advantech has launched a range of widescreen 4.3 to 10.1″ HMI industrial panels for controlling a wide range of programmable logic controllers.
National Instruments Sound and Vibration Measurement Suite
02 November, 2011 | National Instruments Aust Pty Ltd
The latest version of the NI Sound and Vibration Measurement Suite software provides a comprehensive collection of analysis and signal processing tools for noise, vibration and harshness (NVH) testing, machine condition monitoring (MCM) and audio test applications. Engineers can use the suite as stand-alone software or combine it with NI hardware and NI LabVIEW system design software to simplify test system development and control.
TML TMR 200 data acquisition system
02 November, 2011 | Bestech Australia Pty Ltd
The TMR 200 data acquisition system from TML, Japan, is a compact multichannel data acquisition system that enables the use of a combination of various sensor inputs according to measurement purpose.
Allen-Bradley PanelView Plus 6 HMI range
02 November, 2011 | Rockwell Automation Australia
The Allen-Bradley PanelView Plus 6 range of human machine interfaces (HMIs) is designed for applications that require monitoring, controlling and displaying information in dynamic ways, where operators must quickly understand machine status in order to make better decisions.
Boge silencer hood for C series compressors
01 November, 2011 | Boge Compressors (Australia) Pty Ltd
Boge has recently enhanced its small C series range of screw compressors up to 15 kW. The compact C 10 LDR to C 20 LDR are now available with Boge’s super silencer hood, making this range suitable for point-of-use applications.
Interworld Electronics APXG-Q5420 industrial wireless access point
31 October, 2011 | Interworld Electronics and Computer Industries
The APXG-Q5420 industrial wireless access point is designed to enable M2M equipment to become the centre of a self-sufficient Wi-Fi network. The APXG-Q5420 allows access to serial data and network resources from Wi-Fi-enabled devices, including laptops, tablets and handhelds powered by Android, iOS, or Windows.
