Installation tester

Click2Contact

The InstalTest 3017 installation tester is claimed to be Australia's first installation tester with measurement functions and pass/fail limits set to AS/NZS3000 Wiring Rules.

The unit conducts all AS/NZS3000's mandatory tests, including visual inspection, polarity and correct circuit connections - tests not found on British or European installation and multifunction testers.

The unit is programmed with the pass/fail limits, test parameters and tables found in AS/NZS3017 Electrical Installations - Testing & Inspection Guidelines.

Testing and certifying completed work is mandatory, but often not carried out because traditional methods are so time consuming. With the InstalTest, simply choose the 'socket outlet' auto-sequence and socket outlets can be tested at a rate of seconds per socket.

The tester conducts all the tests and inspections required under AS/NZS3000: voltage, visual inspections, earth continuity and resistance, insulation resistance, polarity, correct circuit connections, fault loop impedance and RCD verification tests.

Users can choose tests with fixed parameters and limits or user-defined parameters and limits. Where AS/NZS3017 requires specific test parameters and limits, the InstalTest is pre-programmed with the compliant test settings.

In addition, the InstalTest can be used as a multimeter, insulation tester, loop impedance tester and RCD tester for troubleshooting and general electrical work.

The InstalTest 3017 is also supplied with the essential accessories to conduct tests to AS/NZS3017 such as a resistor box for polarity and circuit connection tests on socket outlets and lighting points.