Hiquel TIP Series TCC-H overcurrent/undercurrent control monitor

Wednesday, 24 September, 2014 | Supplied by: Automated Control Pty Ltd


The Hiquel TIP Series TCC-H overcurrent/undercurrent control monitor provides monitoring for equipment with trip outputs should the current flow go above or below the set point.

The TCC-H monitors either single-phase AC or DC currents and has three measurement ranges, from 5 mA to 10 A RMS. The current control monitor has LED indicators for power supply, contact and reaction timer and programmable latch/no latch alarm. It is DIN-rail mounting (45 mm) and has an adjustable start delay timer (inrush), reaction timer and hysteresis.

Supported supply voltage variation is +10% -15%, with a frequency range of 48-63 Hz. The start surge delay is 0-10 s, and the reaction time can be 0-5 s. Reset time is less than 100 ms, and the operating temperature range is from -20 to +60°C non-condensing.

Online: www.automatedcontrol.com.au
Phone: 02 4964 4022
Related Products

Siemens Sinamics G drives

Siemens has released a new generation of Sinamics G drives for continuous motion applications,...

Testo 735 handheld temperature measuring instrument

The testo 735 handheld measuring instrument is designed to enable flexible onsite temperature...

Portable Memosens pH, conductivity and oxygen analyser

The Knick Portavo 904X is an IECEX-approved portable pH, conductivity and oxygen meter for Zone...


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd