Specifically designed for protecting low-voltage (LV) terminations as well as insulating LV connectors in straight through joints, StockCap medium-wall (MW) tubes are manufactured from cross-linked polyolefin and are hot-melt adhesive lined.
The hot-melt adhesive melts and flows as the tube is shrinking and creates a strong, permanent environmental seal between the cable jacket and the tube. Once shrunk, the cable joint is ready for direct burial or outdoor applications. As a special order, the MW tubes can be supplied unlined for mechanical protection applications like adhesion to plastic and metal.
StockCap MW tubes are flame retardant, quick to install even in confined spaces and provide long-term resistance to weathering, moisture and dust contamination. The polyolefin material has an unlimited shelf life and complies with the requirements of ESI 09-11.
StockCap MW tubes cover a large range of cable diameters and are available in shrink ratios of 10-4, 16-6, 27-8, 30-12, 40-16, 50-20, 70-22, 100-28, 120-38, 140-42 and 160-50 mm.
Phone: 02 9627 3211
FEAS SSE6030 DC supercapacitor UPS
FEAS GmbH is expanding its SSE30 series with the addition of the 60 V SSE6030...
Flir iXX-Series app-enabled thermal cameras
Built on the company's ACE platform, the iXX combines apps with a thermography inspection...
NORD UNICASE worm gear units with increased torque
NORD Drivesystems has increased the maximum torque of its UNICASE worm gear units.
Learn More
I am interested in StockCap heatshrink tubes.
Complete the form and a supplier representative will be in touch.
