PIlz myPNOZ modular safety relay
01 November, 2022 | Supplied by: Pilz Australia Industrial Automation LPThe PIlz myPNOZ modular safety relay is produced individually according to customer requirements in batch size 1.
Z Energy sets the standard in safe fuel transport and storage
30 September, 2022 | Supplied by: Pilz Australia Industrial Automation LPLeading-edge safety system helps meet compliance and improve safety.
Leuze ELC 100 safety light curtains
01 June, 2022 | Supplied by: Leuze electronic Pty LtdLeuze is expanding its safety range with the ELC 100 safety light curtains.
Emerson PACSafe configurable safety controller
14 April, 2022 | Supplied by: Control Logic Pty LtdThe PACSafe configurable safety controller is designed for integrated Category 4, Performance Level e, SIL3 machine safety applications.
Rosemount open path gas detectors
09 March, 2022 | Supplied by: EmersonEmerson has released two open path gas detectors to increase safety over wide areas in extreme environments.
Pilz PSEN rd1.2 radar safety sensor
20 January, 2022 | Supplied by: Pilz Australia Industrial Automation LPThe Pilz PSEN rd1.2 radar sensor can be used for Cat. 3/PL d and can therefore be used for robot safely applications.
The importance of emergency stop pull-wire devices
08 December, 2021 | Supplied by: Control Logic Pty LtdEmergency cable pull switches are designed to provide continuous emergency stop control along exposed areas of machinery and conveyors.
Pizzato Elettrica BN series safety control device unit
02 November, 2021 | Supplied by: Leuze electronic Pty LtdWith the BN series control units, the fixing modules can be rotated on the top and bottom of the device to enable variable orientation of the control devices.
PIzzato Elettrica ST H series RFID safety sensors
28 October, 2021 | Supplied by: Leuze electronic Pty LtdDevices of the ST H series can be configured with a permanent magnet incorporated inside the housing, able to generate a holding force between sensor and actuator.
Increasing the safety and reliability of ageing facilities with single loop logic solvers
12 October, 2021 by Michael Carolan* | Supplied by: Moore IndustriesMeeting safety requirements can often be achieved with the simple architecture of single loop logic solvers.
How remote proof testing can improve performance in safety instrumented systems
01 October, 2021 by Marianne Williams, Emerson Automation Solutions | Supplied by: EmersonPartial proof tests provide a safe way to optimise the time interval between full tests for level switches that form part of a safety instrumented system.
Machine safety: 10 common misconceptions
16 August, 2021 | Supplied by: Omron Electronics Pty LtdMany machine safety-related misconceptions continue to be widespread in manufacturing.
Web-based design tool for better cobot safety
10 August, 2021 | Supplied by: Fraunhofer Institute for Factory Operation and Automation IFFThe Fraunhofer Institute for Factory Operation and Automation has created a free web-based design tool that helps companies design their cobot implementations.
Allen-Bradley Guardmaster SafeZone 3 laser scanner
04 August, 2021 | Supplied by: Rockwell Automation AustraliaThe Allen-Bradley Guardmaster SafeZone 3 laser scanner from Rockwell Automation is now enabled with Common Industrial Protocol (CIP) Safety over EtherNet/IP.
Pepperl+Fuchs USi-safety ultrasonic sensor system
01 August, 2021 | Supplied by: Pepperl+Fuchs (Aust) Pty LtdThe Pepperl+Fuchs USi-safety ultrasonic sensor system is designed to work in challenging, dusty environments or in outdoor areas.
