PIzzato Elettrica ST H series RFID safety sensors

Thursday, 28 October, 2021 | Supplied by: Leuze electronic Pty Ltd


The ST H series RFID safety sensors from Pizzato Elettrica are equipped with an M12 plastic or stainless steel connector, a multicolour signalling LED visible from both sides of the housing, Multitag programming and versions for wide temperature ranges from -35 to +85°C.

Devices of the ST H series can be configured with a permanent magnet incorporated inside the housing, able to generate a holding force between sensor and actuator. This way, the guard can be kept closed even where there are vibrations, after a recoil during closing, or in areas where air turbulence tends to open the lighter guards.

The magnetic holding force can be selected among from different magnitudes, in order to adapt to any usage situation. The symmetry of the housing allows the same sensor to be used on both left and right doors by simply rotating the sensor onto itself. The 78 mm mounting hole spacing facilitates the replacement of the traditional SR B magnetic sensors with an advanced RFID safety sensor.

The ST H series RFID sensor from Pizzato are compatible with all ST series actuators and are IP67 and IP69K rated allowing use in tough conditions.

Online: www.leuze.com.au
Phone: 1300 538 933
Related Products

Pilz PSEN rd1.2 radar safety sensor

The Pilz PSEN rd1.2 radar sensor can be used for Cat. 3/PL d and can therefore be used for robot...

Pizzato Elettrica BN series safety control device unit

With the BN series control units, the fixing modules can be rotated on the top and bottom of the...

Allen-Bradley Guardmaster SafeZone 3 laser scanner

The Allen-Bradley Guardmaster SafeZone 3 laser scanner from Rockwell Automation is now enabled...


  • All content Copyright © 2022 Westwick-Farrow Pty Ltd