Pneumatics & hydraulics > Connectors, couplings & seals

EXAIR high-temperature line vacuum conveyors

29 October, 2019

EXAIR's line vacuum conveyors convert hose, tube or pipe into an inline conveying system for high-temperature materials up to 482°C.

Swagleok RHPS Series regulators with low-temp seals

03 May, 2019

Swagelok has released a low-temperature seal option. The seal is designed to maintain a strong seal in cold climates and applications where significant cooling occurs due to high pressure drop.

RS Components expands SMC pneumatic component range

12 January, 2016

RS Components has added more than 600 products from SMC to its range of pneumatic equipment.

Parker Hannifin WireFree locking device

01 December, 2015

A wire-free device for locking the nuts of two-ferrule compression fittings on instrumentation tubing is now available from Parker Hannifin.

Protect-Air HoseGuard safety fuses

20 October, 2015

Protect-Air HoseGuard safety fuses offer protection to pneumatic systems in the event of a broken compressed air hose or pipe.

Oz Seals super polymer PK56 and PK58 hydraulic piston seals

06 July, 2015

Oz Seals supplies the robust PK56 and PK58 hydraulic piston seals in super polymer rather than the traditional rubber and fabric combination, which can delaminate.

Parker Hannifin flared cone tube connection technology

28 May, 2015

Parker Hannifin's flared cone tube connection technology is designed for working pressures as high as 1550 bar and provides users with a simple and reliable means of speeding the assembly of instrument tubing systems.

Flowrox Expulse pulsation dampener

27 March, 2015

The Expulse pulsation dampener is designed to assist during pump and dampener maintenance by reducing the noise and vibration associated with traditional methods.

Swagelok High-Volume Swaging Unit

19 December, 2013

Engineered to streamline nut-ferrule installation, the Swagelok High-Volume Swaging Unit (HVSU) is aimed to increase safety and productivity for the oil and gas, alternative fuel and general industries.

Snap-Tite Quikxchange hydraulic disconnect couplings

09 September, 2013

With Quikxchange, sliding thread covers protect the outer threads from dirt and contamination on the coupler half that is mounted on the equipment.

Snap-Tite 75 Series and 59 Series hydraulic couplings

30 August, 2013

Snap-Tite’s 75 Series and 59 Series hydraulic couplings are designed for high-pressure hydraulic service.

Elfab Flo-Tel+ burst detection system

20 June, 2013

Rupture disc manufacturer Elfab has been awarded IECEx approval for its burst detection system, Flo-Tel+.

Swagelok jacketed tube connectors

02 May, 2013

Designed to safeguard against environmental ingress, these jacketed tube connectors provide a leak-tight, tube fitting connection between sections of single jacketed tubing, eliminating the need for sleeves and sealing tape.

Gates GlobalSpiral hydraulc couplings

27 August, 2012

The Gates GlobalSpiral couplings are claimed to reduce costs and simplify operations as they are compatible with wire-braid and spiral-wire hydraulic hose assemblies.

StockCap hydraulic hose collars

25 November, 2011 by

StockCap hydraulic hose collars are designed to finish off the hose end and fitting providing a professional finish as well as offering protection from dust and moisture.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd