Instrumentation > Pressure

Melt pressure transducers

01 November, 2008

The MPT160, MPT161 and MPT26X series are a range of melt pressure and temperature transducers that are constructed with a full bridge strain gauge circuit and are made wholly from stainless steel material. Additionally, the pressure diaphragm features a surface treatment with special alloy coating for all models.

Pressure calibrators

01 November, 2008

The Fluke 719 electric pressure calibrators are high-performance, lightweight devices featuring a built-in electric pressure pump that makes it possible to quickly calibrate and test pressure devices with one hand.

Keller AG digital manometer

01 November, 2008

Keller AG has introduced the high-accuracy LEO 2 digital manometer, designed to handle demanding monitoring tasks in the plant and machinery manufacturing sector.

Furness Controls differential pressure transmitter

01 November, 2008

The Furness Controls FCO352 is a fully configurable, industrial differential pressure transmitter available in measurement ranges from ±5 Pa to ±20 kPa full scale. The core transducer is based on the Furness Controls flat diaphragm design which allows the accuracy to be maintained down towards zero — reliably performing to ±0.25% of reading.

Digital logging pressure gauge

20 October, 2008

The Crystal XP2i digital logging pressure gauge is a safe, rugged, lightweight instrument used for logging pressure.

Pressure transmitters

05 October, 2008

The AT9000 advanced transmitter from Yamatake is a microprocessor-based smart transmitter that features high performance and good stability. Capable of measuring gas, liquid, vapour and liquid levels, it transmits 4-20 mA DC analog and digital signals according to the measured differential pressure.

Pressure switch

05 October, 2008

The 50D is an IP65-rated electronic pressure switch suitable for use in pressure ranges -1 to 0 bar, -1 to 1 bar, 0 to 6 bar and 0 to 10 bar. It has two electric outputs with four output options: 2xPNP, 2xNPN, PNP+analog and NPN+analog.

Pressure switch/transmitter

01 October, 2008

The Noshok 800 Series indicating pressure switch/pressure transmitter provides continuous pressure monitoring and allows programming of the setpoints without pressurising.

ABB pressure transmitters

05 September, 2008

ABB has enhanced its 364 series of differential and gauge pressure transmitters with the addition of all welded direct and remote-mounted diaphragm seals. The 364 series is designed to suit a wide range of industries, including those with aggressive or hazardous environments where performance needs to be optimised, such as those in chemicals or offshore oil and gas production.

UltraStable US5100 pressure transducer

05 September, 2008

The UltraStable US5100 pressure transducer from Measurement Specialties features a total error band of just 0.75%. It exceeds the latest heavy industrial CE requirements — including surge protection — and is voltage surge protected in both positive and reverse polarity.

Filter monitor

08 August, 2008

The type PMP differential pressure sensors are designed for monitoring filters for air and other gases. The compact microprocessor controlled units are housed in a robust plastic casing with an enclosure class of IP65.

Low differential pressure transmitter

17 July, 2008

The Series 610 low differential pressure transmitter is capable of measuring the pressure and flow of air or non-conducting gases at greater resolution in clean rooms, isolation rooms and other critical environments.

SEN pressure sensors

08 July, 2008

The SEN pressure sensors are compact and can be used in a variety of applications. The measuring principle uses a thick film ceramic measuring cell, has very good repeatability and is very reliable. Automatic temperature compensation is provided to give great accuracy.

Hazardous area pressure sensor

08 July, 2008

Turck has expanded its line of pressure sensors to include a specialty sensor for hazardous areas. The PT4300 is a media isolated stainless steel pressure sensor for use in oil and gas, refrigeration, gas compression, test stands and industrial OEM applications.

Differential pressure piston-type gauge

17 April, 2008

Dwyer Instruments has released the series PTGA differential pressure piston-type gauge. It can be used to measure the pressure drop across filters, strainers, pump performance testing and heat exchanger pressure drop monitoring.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd