Online sulfur analysis boosts distillation quality
26 May, 2014One of the toughest challenges for a petroleum refinery is to select the best combination of components to produce cost-effective, on-spec petroleum products.
WIKA GDT-20 and GDHT-20 SF6 sensors
12 December, 2013The GDT-20 and GDHT-20 transmitters from WIKA provide the foundation for continuous, digital monitoring of the quenching and insulating gas sulphur hexafluoride.
Michell Instruments XZR200 oxygen analyser
20 November, 2013Michell Instruments has extended its range of oxygen analysers with the introduction of the compact and cost-effective XZR200, which is capable of measuring percentage oxygen to better than 1% of span.
Emerson Micro Motion 3098 gas-specific gravity meter
29 October, 2013The Micro Motion 3098 gas-specific gravity meter directly measures gas molecular weight and can be configured to output hydrogen purity, specific gravity, relative density, calorific value/BTU or Wobbe Index.
WIKA GTU-10 mobile SF6 transfer unit
14 October, 2013The GTU-10 is a portable SF6 device that handles a flow rate of 1.8 m3/h.
Vaisala CARBOCAP GMT220 series carbon dioxide transmitter
27 September, 2013The Vaisala GMT220 series is designed to measure carbon dioxide in harsh and humid environments.
General Monitors TS4000H toxic gas detector with IECEx approval
28 August, 2013The TS4000H toxic gas detector is now IECEx approved, and offers protection against a wide range of hazardous industrial gases and is able to safeguard against oxygen deficiency.
Mettler Toledo GPro 500 TDL in-situ oxygen sensor
01 August, 2013The GPro 500 sensor is a tunable diode laser (TDL) gas analyser, meaning no sample extraction or conditioning is necessary, and it is immune to interference from moisture, dust or background gases.
WIKA GTU-10 SF6 transfer unit
26 July, 2013The GTU-10 is an SF6 transfer unit that can handle a flow rate of 1.8 cubic metres per hour.
Ametek Thermox WDG-V extractive combustion gas analyser
08 July, 2013The Ametek Thermox WDG-V extractive combustion gas analyser has been third-party certified for SIL2 implementation in safety instrumented systems (SIS).
Oxygen analyser saves fuel and helps the environment at Australian crematoria
24 June, 2013A major supplier of cremators in Australia has installed Michell oxygen analysers at its sites around the country, helping to reduce its consumption of natural gas by 40%.
Bacharach GDX-350 Series fixed gas-detection transmitters
24 May, 2013The GDX-350 Series of fixed gas-detection transmitters offer an expanded range of sensors for the detection of toxic, combustible and asphyxiate gases in an intrinsically safe or explosion-proof housing.
General Monitors Model IR400 point IR combustible gas detector
06 May, 2013The General Monitors Model IR400 point IR combustible gas detector features a 3 s T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and avoid potential accidents.
Condumax II hydrocarbon and water dew-point analyser increases confidence in gas quality
21 April, 2013Michell Instruments enabled a natural gas storage operator to improve the hydrocarbon and water dew-point measurements at its natural gas storage site in Europe.
Precisive 5 compact hazardous area-compliant gas analyser
04 April, 2013The Precisive 5 gas analyser requires no carrier gases, no calibration gases and offers fast-response analytics without compromising accuracy, repeatability, linearity or stability in the presence of interferences.
