Instrumentation > Environment

Michell Instruments HygroSmart 280 and 290 series relative humidity transmitters

16 June, 2015

As well as being flexible for use in a wide range of processes, the HygroSmart 280 and 290 series include an interchangeable sensor that allows routine maintenance to be made in 30 s for most models.


Emission monitoring benefits for power plants

09 February, 2015 by John Immelman

Monitoring and measuring the emissions of all process plants can give an indication of the levels of pollution being exhausted into the atmosphere and, as importantly, the degree of efficiency of the plant. In many cases, if the plant efficiency is improved, the emission of pollution is significantly reduced; win-win for everyone.


Cerlic Blanko handheld sludge blanket profile sensor

05 November, 2014

The portable Cerlic Blanko sensor provides a tool for operators and process teams to not only see but record the sludge blanket profile and interface in challenging water/wastewater, industrial and mining applications.


Rosemount Analytical 6888 in-situ flue gas O2 analyser

01 October, 2014

Emerson Process Management has enhanced the Rosemount Analytical 6888 in-situ flue gas O2 analyser with new diagnostics that help optimise the combustion efficiency of large boilers and industrial furnaces.


Hach FilterTrak laser nephelometer

23 July, 2014

The FilterTrak laser nephelometer can detect changes in turbidity as low as 0.0005 NTU, allowing the instrument to detect concentrations of submicron-sized particles that are a precursor to larger particles.


ifm efector LDP100 optical particle monitor

20 May, 2014

The LDP100 optical particle monitor measures the degree of cleanliness or the level of contamination in mineral oils, ester oils and biodegradable oils.


Michell DryCheck dew point instrument and sampling system

08 April, 2014

The DryCheck from Michell is an accurate and stable dew point instrument, which includes a built-in simple sampling system.


Michell Easidew PRO I.S. dew-point transmitter fast-connection option

10 February, 2014

Michell Instruments has added a new fast-connection option to its Easidew PRO I.S. dew-point transmitter to make commissioning and maintenance in locations that are difficult to access as simple as possible.


Sigrist OilGuard oil-in-water monitor

23 July, 2012

The Sigrist OilGuard provides online continuous monitoring of water for traces of mineral oils, using the fluorescence principle.


ST100 Series thermal mass flow meters

05 March, 2012

ST100 Series thermal mass flow meters from Fluid Components International (FCI) are available with FCI’s VeriCal in-situ calibration verification system and are suitable for flare gas applications aboard offshore platforms, land-based oil/gas facilities and chemical plants.


Primary producer transforming waste into green energy

14 August, 2011

Clean water and green energy technology from Global Water Engineering (GWE) has been used by Chokyuenyong Industrial in Thailand to cut effluent COD pollution levels at its cassava production plant by more than 95%.


Interworld Electronics Minigoose-II web-based remote temperature monitor

27 July, 2011

The Minigoose-II remote temperature monitor can be used to protect production processors, cool rooms, laboratories, server rooms, data centres and any critical facilities that require climate control.


FCI VeriCal in-situ calibration verification for flare gas flowmeters

24 February, 2011 by

Fluid Components International (FCI) has released its VeriCal in-situ calibration verification system for gas and flare flowmeters. The VeriCal System is a device that allows technicians to confirm flow measurement accuracy in minutes, saving time and lowering operating costs in flare gas applications aboard offshore platforms and land-based oil and gas, and chemical plants.


Signet 4630 chlorine analyser system

17 January, 2011

The Signet 4630 chlorine analyser system is designed with amperometric sensing technology, and incorporates a clear flow cell, flow regulator, sensors, filter and rotameter in one unit.


Continuous monitoring of particles after high-temperature filtration

14 September, 2010 by William Averdieck, PCME Ltd

Electrodynamic instruments have been used to continuously monitor particle concentrations after ceramic filters used in coal gasification, co-generation and high-temperature metals and chemical processes.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd