AMCI stainless steel resolvers
20 April, 2010 | Supplied by: Automated Control Pty Ltd
AMCI’s stainless steel resolver transducer family offers options of 303 or 304 stainless steel housing and shaft, and a variety of mounting styles. The IP67-rated product line comes standard with either a 1/4, 3/8 or 5/8″ stainless steel shaft and an oversized double row sealed bearing.
Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drives
14 April, 2010 | Supplied by: Rockwell Automation Australia
The Allen-Bradley Kinetix 300 is a range of EtherNet/IP indexing servo drives, designed to eliminate the need for a dedicated motion network, allowing easier commissioning, configuration and start-up of servo drives, motors and actuators. It is also designed to enable the integration of a control solution over EtherNet/IP, including HMI, PACs, I/O and motion, while maintaining reliable, high-speed connectivity.
Turck BIM-UNR position sensors for C-groove cylinders
08 April, 2010 | Supplied by: Turck Australia Pty Ltd
The BIM-UNR line of compact magnetic cylinder position sensors now includes a dual sensor designed for detecting short and long stroke C-groove cylinders. BIM-UNR dual sensors combine two sensors through one cable connection to speed installation, as well as lessen wire costs and connection points. This design makes the sensor beneficial in areas where multiple cylinders are used, as it only requires a single cable. With dimensions of 2.9 x 4.6 x 18 mm, the sensors feature a low profile.
ASM WS31 linear position sensor
24 March, 2010 | Supplied by: Automated Control Pty Ltd
The WS31 linear position sensor series from ASM offers measuring ranges of 250 and 500 mm and includes a mounting bracket that allows for easy and flexible installation of the sensor and thus position measurement in almost every direction.
How to plan your first vision system
21 March, 2010 | Supplied by: Dindima Group Pty Ltd
Developing a machine vision application for the first time need not be a headache. If you follow a thorough, three-stage process to develop, test and deploy the project, the results should provide an essential tool in product inspection and valuable insight to enhance overall product quality.
Understanding the IEC61131-3 programming languages
15 March, 2010 | Supplied by: Bosch Rexroth Pty Ltd
It was about 120 years ago that Mark Twain used the phrase “more than one way to skin a cat”. In the world of PLC programming, that cliché is still applicable today. Thanks to the International Electrotechnical Commission (IEC), five standard programming languages have emerged as the most common, used for both process and discrete programmable controllers.
Robotic powder coating improves efficiency at Electrolux
12 March, 2010 | Supplied by: ABB Australia Pty Ltd
Every second of every day in any year around the world, Electrolux sells two of its products. This requires state-of-the-art manufacturing facilities, such as the fully automated and flexible powder-coating facility for oven and grill cavities recently installed at Electrolux’s manufacturing plant in Dudley Park, South Australia.
SEW-Eurodrive CMP servomotors
10 March, 2010 | Supplied by: SEW-Eurodrive Pty Ltd
SEW-Eurodrive’s CMP family of servomotors now offers torque ratings of 0.5 to 45 Nm, and is available in six frame sizes with speed ratings of 3000, 4500 and 6000 rpm.
Turck BIM-UNR miniature magnetic cylinder position sensor
10 March, 2010 | Supplied by: Turck Australia Pty Ltd
The BIM-UNR is a miniature magnetic cylinder position sensor designed to mount within C-groove cylinders with no accessories required. Its dimensions are 2.9 x 4.6 x 18 mm.
Macrosensors GHS series LVDT-based gauging probes
10 March, 2010 | Supplied by: Bestech Australia Pty Ltd
Using electronic gauging probes for dimensional gauging of manufactured parts is a well-established quality assurance technique. Typical gauging probes are cylinders with diameters of about 9 mm and lengths ranging from 65 to 100 mm. They incorporate a non-contact inductive position sensor, either LVDT or half-bridge, which uses a spring-loaded movable armature coupled to a shaft that is supported in a high-precision linear bearing. They generally have a maximum gauging range of 0.25 to 2.5 mm, with resolutions of fractions of a micron.
Distributed control provides plug-and-play function blocks
10 March, 2010 by Ralf Möbus | Supplied by: Pilz Australia Industrial Automation LP
Machine builders often find themselves in a contradictory situation. On the one hand they have to react flexibly to customer needs with customised machines, while on the other hand product standardisation reduces costs and engineering effort. Modular machinery design has the potential to serve both aims.
Understanding the IEC61131-3 programming languages
05 March, 2010 | Supplied by: Bosch Rexroth Pty Ltd
It was about 120 years ago that Mark Twain used the phrase “more than one way to skin a cat”. In the world of PLC programming, that cliché is still applicable today. Thanks to the International Electrotechnical Commission (IEC), five standard programming languages have emerged as the most common, used for both process and discrete programmable controllers.
Robotic automation enabling SMEs to compete on global market
05 March, 2010 | Supplied by: SAGE Automation
Industrial robots, once the preserve of large-scale manufacturers, are increasingly being seen in small to medium-sized enterprises (SMEs).
Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drive
28 February, 2010 | Supplied by: Rockwell Automation Australia
The Allen-Bradley Kinetix 300 is a range of EtherNet/IP indexing servo drives designed to eliminate the need for a dedicated motion network, allowing easier commissioning, configuration and start-up of servo drives, motors and actuators.
Sticky fingers? Tiny robots to grip nanotubes
25 February, 2010
How do you handle the tiny components needed for constructing nanoscale devices? A European consortium has built two demonstrators that include microrobots equipped with microgrippers to automatically pick up and install carbon nanotubes thousands of times thinner than a human hair. They have even tackled that ever-present bane of nanotechnology - sticky fingers.
