Factory automation > Motors

maxon motor brushless DC motor

08 July, 2019

Brushless DC design has the advantages of both outrunner and inrunner motors.


JVL all-in-one step-servo motors

21 January, 2019

JVL has released its all-in-one step-servo motor with built-in encoder, drive, controller, Ethernet switch and Safe Torque Off option.


JVL ServoStep integrated stepper motors

14 December, 2017

The latest generation of integrated stepper motors from JVL, ServoStep, advances previous designs, incorporating users' feedback.


Allen Bradley Kinetix VPC servo motor

27 April, 2017

The Allen Bradley Kinetix VPC servo motor is designed to provide high continuous torque at high speeds over long periods of time.


JVL integrated stepper motors

02 December, 2016

JVL Industri Elektronik A/S has announced NEMA23 integrated stepper motors with a speed precision of 0.01 rpm and acceleration precision of 1 rpm/s.


Faulhaber 2668…CR DC micromotor

24 November, 2015

Due to a bigger NdFeB magnet and a high copper content in the winding, the 2668…CR DC micromotor supplies a rated torque of 70 mNm.


Faulhaber 1727…CXR DC micromotor

19 November, 2015

A powerful neodymium magnet gives the graphite‐commutated motor a high power density with a continuous torque of 4.9 mNm.


maxon motor DC-max motor and GPX gearhead

17 November, 2015

The DC-max motor is a motor offering high-powered rare earth magnets and maxon's rhombic winding packaged in a cost-effective housing and fitted with a GPX gearhead.


maxon motor custom DC gearmotor

17 August, 2015

maxon motor has released a brushless DC flat motor that incorporates a 936:1 ceramic planetary gearhead.


Sanyo Denki SANMOTION 42 and 56 mm stepper motors

15 June, 2015

Targeting machine builders and manufacturers of scientific and medical instruments, the SANMOTION two-phase stepper motors are available with unipolar or bipolar windings together with a range of matching microstepping DC drivers.


maxon motor high-power brushless DC motor

08 June, 2015

A 14-pole, high-torque, 40 mm brushless DC inner rotor motor has been released by maxon motor can produce continuous torque levels of 232 mNm at over 7000 rpm.


SG Transmission Series 62 fail-safe electromagnetic brakes

11 July, 2013

The SG Transmission 62 fail-safe electromagnetic brakes are suitable for improving safety on machines using stepper and servo motors with heavy vertical loads. If the power fails, the brake locks and the load is prevented from falling.


Kollmorgen IP69K full stainless washdown servo motors

15 April, 2013

Kollmorgen USA IP69K full stainless washdown servo motors are available in five frame sizes and 16 frame/stack length combinations.


Powerful drives for a modern brewhouse

25 March, 2013

Over 40 years of continuous around-the-clock operation, the tanks and vats in the Forst specialty beer brewery’s old brewhouse in Italy produced 25 million hectolitres of beer. Now, since brewing technology has progressed, the management decided to construct a completely new brewhouse, saving 30% in energy consumption.


Kollmorgen stainless washdown servomotors

06 March, 2013

Available in five frame sizes and 16 frame/stack length combinations, the Kollmorgen stainless washdown servomotors supply torques up to 80 Nm (390 Nm peak) and speeds up to 7500 rpm.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd