Omron 1S servo range

Tuesday, 26 November, 2019 | Supplied by: Omron Electronics Pty Ltd

Omron has released additional models in its 1S servo range. The original 1S servo (up to 3 kW) has been expanded and now delivers up to 15 kW.

New technology optimises the full cycle, through the machine design, installation and commissioning tasks and finally to the maintenance once in production.

In addition to the traditional motion solution, the 1S servo offers safety over the network (FSoE) as well as its standard hardware safety input. It has improved loop control allowing accurate and higher machine productivity.

The 1S range now features a 23-bit multiturn absolute encoder without battery backup. This means it won’t lose its position when power is removed. The range comes with Omron’s Sysmac Studio programming software, which provides a full suite of integrated functions.

The servo can be easily connected to a controller via EtherCAT, with a 125 µs communications cycle. Also, it is easily tuned, with two degrees of freedom, and several servos can be tuned at once, meaning overall set-up time has been reduced by 50%.

The new 1S series offers simplified machine design and maintenance. It is compact with a smaller motor size and can be easily mounted, with no external terminal rail needed.

Phone: 02 9878 6377
Related Products

IDEC MicroSmart FC6A Plus PLC software update

IDEC Corporation has announced an update to add EtherNet/IP communications to the MicroSmart FC6A...

Leuze DRT 25C dynamic reference diffuse sensor

The DRT 25C sensor works with three light spots and references the conveyor belt instead of the...

Red Lion Crimson 3.2 edge controller software

Red Lion has released version 3.2 of its Crimson software to complement its FlexEdge platform.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd