Equipment > Cables, energy chains & conduits

Treotham Treoflex-EMC-UV-3 shielded motor cables

23 June, 2015

Treoflex-EMC-UV-3 cables are used to supply power to motors from frequency converters while maintaining full electromagnetic compatibility (EMC).


Turck extremelife-60 cables

11 May, 2015

Turck's extremelife-60 cables are designed with a specially engineered proprietary cable jacket material, allowing them to remain flexible enough to work at -40°C and carry UL -60°C cold bend and UL/CSA -40°C cold impact listings.


Lumberg Automation M12 moulded cord sets

04 December, 2014

These M12 cord sets are robustly designed to establish high-speed connections for Industrial Ethernet applications across transportation, automotive and automation applications.


igus Chainflex cable carrier

02 December, 2014

The igus Chainflex (350 mm interior link height) was specifically developed for the most demanding applications where electrical cables and large hydraulic hoses must be guided and protected on mission-critical equipment.


Treotham Automation Helucom FS90 fire-resistant fibre-optic cable

30 October, 2014

Helucom FS90 is a range of fire-resistant fibre-optic cable that ensures data communication is upheld for 90 minutes even in the event of a fire.


igus Triflex TRLF-100 three-dimensional cable carrier

27 August, 2014

The igus Triflex TRLF-100 three-dimensional cable carrier has three pivoting crossbars that can be opened at any time, making inserting or exchanging cables and hoses quick and easy.


Prysmian flame-barrier cables

19 August, 2014

Prysmian's range of flame-barrier cables is suitable for use with non-barrier-type flameproof glands and cover all requirements for LV power, LV control and ELV instrumentation.


Phoenix Contact cable glands

31 July, 2014

The latest range of cable glands form Phoenix Contact is suitable for both normal industrial environments as well as for hazardous areas.


igus CF270.UL.D single-core bending-resistant cable

30 May, 2014

The CF270.UL.D single-core bending resistant cable, made of fine strands, has been developed for flexible operation in energy chains used in machine tools.


Industrial Ethernet – challenges and opportunities – an eBook

08 May, 2014

Connected enterprise requires a technology architecture that is capable of securely moving large volumes of data across many connected devices to the high-level applications and systems used for visualisation and analysis. To maximise output, harness the Ethernet and ePAC to provide a ‘self-healing’, fault-tolerant network.    


Phoenix Contact outdoor M12 cabling for CANopen and DeviceNet

02 April, 2014

Phoenix Contact has extended its range of M12 connectors for outdoor use with cabling for CANopen and DeviceNet applications.


igus Triflex RSP robot cable retraction system

28 October, 2013

Triflex RSP is designed for secure cable guidance on large robot arms or for robots programmed to perform complex movements.


OSCG E1WF and E1XF cable glands for hazardous areas

16 September, 2013

The E1WF and E1XF glands have double compression for the outer/inner jacket of cable. Compression seals are made from silicone instead of PVC and can be used for all types of armoured cables.


Treotham Treoflex-EMC-UV-3 plus EMC-shielded cables for motors

07 August, 2013

Treoflex-EMC-UV-3 plus cables are made with a special construction and are used to supply power to motors from frequency converters while maintaining full electromagnetic compatibility (EMC).


igus guidefast guiding trough

05 August, 2013

The ‘guidefast’ guiding trough from igus has been developed especially for a lateral mounting to standard carriers of industry and hall cranes, and the modular design and a reduced number of components significantly reduce the installation time.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd