Rotary screw compressor
01 November, 2008 | Kaeser Compressors Australia
The DSDX rotary screw compressor range has a compact design. Motor powers of either 132 or 160 kW provide air deliveries of 24 to 30 m3/min. Both models in the range (DSDX 243 and 302) are designed for pressures up to 15 bar.
Multifunction timer
01 November, 2008 | Eaton Electrical (Australia) Pty Ltd
The Eaton Durant E42A24M multifunction timer features an 11-pin base with two timed changeover outputs. The timer features seven multifunction modes that include on delay, off delay, single shot, percentage timer, pulse output, timing after a pulse, and timing after closing or opening a contact.
ABB Australia low-voltage AC motors
01 November, 2008 | ABB Australia Pty Ltd
ABB Australia has launched low-voltage AC motors with improved energy efficiency and life cycle value. The motors are available from 0.06 to 95 kW while the frame size starts from 56, going all the way to 250. The range is classified into three ranges: general performance, industrial performance and process performance. Frame materials include cast iron and aluminium.
Sonar transducer for level control
01 November, 2008 | Hawk Measurement Systems Pty Ltd
The line of ‘fourth-generation’ sonar transducers designed for improved sensing of interface levels in clarifiers and thickeners is available. The sensors claim improvements in overall power, penetration and calibration density range. They provide better capability under high suspended solids loading, ‘sliming’ and generally upset process conditions.
Component HMIs
01 November, 2008 | Rockwell Automation Australia
Suitable for OEMs and other industrial operators, the Allen-Bradley PanelView Component operator interface provides the right amount of control at a cost-effective price.
Robot programming GUI
01 November, 2008 | Marand Precision Engineering
SmartGUI is the graphical user interface for Kuka robots. Robots only work on instruction and the SmartGUI system is designed to enable that instruction be straightforward and simple.
Melt pressure transducers
01 November, 2008 | Bestech Australia Pty Ltd
The MPT160, MPT161 and MPT26X series are a range of melt pressure and temperature transducers that are constructed with a full bridge strain gauge circuit and are made wholly from stainless steel material. Additionally, the pressure diaphragm features a surface treatment with special alloy coating for all models.
Small to midrange system controller
01 November, 2008 | ABB Australia Pty Ltd
The AC 700F controller is designed to close the gap between generic PLCs and complex process control systems.
Serial interface manifold system
01 November, 2008 | SMC Australia | New Zealand
The IP67-rated EX600 serial interface manifold system offers up to 512 digital inputs and 512 digital outputs, and also offers analog inputs, diagnostics, Speedcon connectors and current industry protocols.
Audible indicator lights
01 November, 2008 | Micromax Pty Ltd
Banner Engineering’s Ez-Light audible indicator lights are designed for operator guidance and indication of equipment status. These rugged indicators feature multi-coloured, long-lasting LEDs, deliver a convenient solution for displaying the status of remote and inaccessible sensors, and minimise the need for costly and inconvenient bulb replacements.
Load pins
01 November, 2008 | Bestech Australia Pty Ltd
The 5719/5799 model double-ended shear-beam load pins from BCM Sensor Technologies are made from either alloy steel (5719) or stainless steel (5799) and sealed to IP66 or IP67 protection grade, depending on application conditions.
Clean air filter
01 November, 2008 | SMC Australia | New Zealand
Providing clean air and nitrogen gas to process applications is possible with the Series SFD clean air filter.
Positive pressure gripper
01 November, 2008 | SMC Australia | New Zealand
Many applications requiring materials handling techniques employ the use of a vacuum pump, vacuum ejectors and vacuum pads. Often it is not possible to employ vacuum pick-up due to the material or the sensitive or physical nature of the product.
CAM software
01 November, 2008 | Technology Sales & Support
CNC Software has released Mastercam X3, offering expanded machining flexibility and an increased emphasis on speed and automation. Feature-based machining, 2D high-speed tool motion and faster toolpath generation combine with dozens of additional enhancements in a package intended to improve shop floor productivity.
Universal signal conditioner
01 November, 2008 | Burkert Contromatic NZ
The loop-powered eLINE LPI signal conditioner works with most standard signal types, in one unit without jumpers (milliamps, millivolts, volts, thermocouple, RTD and resistance).
