Steute EEx ZS 73 SR series hazardous area belt drift switches
28 April, 2011 | NHP Electrical Engineering Products Pty Ltd
The Steute EEx ZS 73 SR series of hazardous-area belt drift switches can be used to monitor the alignment of conveyor belts and, depending on the application, can either be used to switch off the equipment or to provide automatic correction of the belt’s alignment should a misalignment occur.
Land Instruments Lancom 4 portable flue gas analyser
28 April, 2011 | OneTemp Pty Ltd
A compact portable flue gas analyser that can monitor up to nine different gases and 17 measurement parameters has been introduced by Land Instruments International, a unit of Ametek. The Lancom 4 analyser weighs 6 kg and is housed in a single robust enclosure for ease of use and reliability in harsh boiler and stack environments.
Unitronix 24″ widescreen industrial displays
28 April, 2011
| Unitronix Pty Ltd
Unitronix has released an industrial-grade 24″ widescreen format (16:9) display. Mechanical configurations include (NEMA 4X) IP66-, IP65- and IP50-rated panel and VESA mounts.
GIW HVF high-volume froth pump
28 April, 2011 | KSB Australia Pty Ltd
GIW Industries has launched a high-volume froth (HVF) pump that can pump froth without airlocking. The HVF provides continuous operation without shutdown or operator intervention. Its hydraulic design removes air from the impeller eye while the pump is running, so the process can be kept moving, improving efficiency.
Perle Systems Iolan DS serial ethernet converters
28 April, 2011 | Belden Australia Pty Ltd
Belden has announced the addition of four Perle Systems’ Iolan DS serial ethernet converters to the Hirschmann product line. The converters enable the connection of end devices to ethernet networks and are easy to configure through the Perle Device Manager software.
Parker Hannifin HMIX electro-hydraulic cylinder
28 April, 2011 | Parker (Aust) Pty Ltd
Parker Hannifin’s HMIX cylinder is a fully integrated subsystem, combining tie-rod cylinder technology with a high-precision feedback transducer, manifold and pipework, into a single easy-to-fit unit.
ICP DAS GW-7472 EtherNet/IP to Modbus RTU Master Gateway adapter
28 April, 2011 | ICP Electronics Australia
The GW-7472 EtherNet/IP to Modbus RTU Master Gateway adapter from ICP DAS is designed for data-exchange between the Modbus RTU network and the EtherNet/IP network. It reads the register data from the Modbus RTU slaves and then publishes this data to the input register of the EtherNet/IP scanner and vice versa.
Harting Han HC 250 high-current connector
28 April, 2011 | HARTING Pty Ltd
The Han HC 250 connector is a high-current connector in a compact size with flexible configuration. The HC 250 one-pole crimp module can be connected in various frame geometries to produce the required number of poles (up to four) in a compact space in the existing Han size 24B HPR housing.
Harting Han Q 12/0 PCB adapter
28 April, 2011 | HARTING Pty Ltd
The Han Q 12/0 PCB adapter is a member of the Han 3 A series connectors from Harting that provides the option of direct connection to device boards. In addition to the actual PCB adapter, special versions of the Han Q 12/0 connector’s male and female inserts for the PCB adapter will be available.
Moore Industries HIM HART loop interface and monitor
28 April, 2011 | Moore Industries
The HIM HART loop interface and monitor helps to unlock the full potential of new and in-place smart HART multivariable transmitters and valves by allowing trusted smart devices to be left in place, while still taking advantage of the additional information they can provide.
Fluke Ti9 entry-level thermal imager
27 April, 2011 | Fluke Australia Pty Ltd
The Ti9 is a rugged entry-level thermal imager that has a widescreen format colour LCD and a 19,200 pixel detector. The instrument incorporates a thermal imager lens with adjustable focus, and detects a wide -20 to +250°C temperature range.
Chambrelan heavy-duty telescopic slides
26 April, 2011 | TEA Transmissions Pty Ltd
Chambrelan heavy-duty telescopic slides are designed for use in industrial applications. They require minimum maintenance, except in extreme environments. Slides are available in steel, aluminium and stainless steel. All slides are produced with a treatment against corrosion which means they can withstand 250 h in salt spray. Additional surface treatments are available.
National Instruments 9792 WSN gateway and WSN-3226 measurement node
26 April, 2011 | National Instruments Aust Pty Ltd
National Instruments has announced two additions to the communication and measurement capabilities of the NI wireless sensor network (WSN) platform. The 9792 is a programmable WSN gateway that can communicate with NI WSN measurement nodes as well as other hardware through a variety of open communication standards, and the WSN-3226 voltage/resistance temperature detector (RTD) combination node provides support for resistance-based measurements such as RTDs and potentiometers and provides engineers and scientists the ability to combine voltage and temperature measurements on a single NI WSN device.
HepcoMotion SBD sealed belt-driven units
25 April, 2011 | TEA Transmissions Pty Ltd
HepcoMotion SBD sealed belt-driven units are offered in standard and cleanroom configurations, come in two sizes and are claimed to provide a higher level of performance in terms of load capacity and life than other comparably sized systems.
Pepperl+Fuchs MAC335 stationary universal code reader
24 April, 2011 | Pepperl+Fuchs (Aust) Pty Ltd
The MAC335 stationary universal code reader is able to read all common 1D and 2D codes (25 different code symbologies). This is an economical compact reader with small mounting dimensions and is designed for stationary reading. It can read codes within a range from 20 to 300 mm. This means codes can be read reliably without having to mechanically adjust the lenses or use different lenses or other code-reader versions. The reader’s high resolution of 1.3 megapixels enables it to read both very small and large codes without having to change settings.
