Doberman DGM-410 M2M mini programmable controller
14 July, 2011 | Ethernet Direct
The Doberman DGM-410 is an M2M mini programmable controller equipped with a cellular transceiver intended to monitor industrial equipment. Its purpose is to send real-time data to the monitoring system in order to provide real-time status and can handle large amounts of data. The optional GPS model can serve as a tracking system used in vehicle management or maritime systems. The DGM series is designed with GPRS/GSM module, an ethernet interface, optional GPS module, three digital inputs and three digital outputs, eight analog inputs, two RS232 ports and an RS485 port. The DGM series is suitable for industrial rated environments due to its robust housing design.
Endress+Hauser Levelflex FMP55 multiparameterlevel transmitter
14 July, 2011 | Endress+Hauser Australia Pty Ltd
The Levelflex FMP55 level transmitter uses both capacitance and guided wave radar technologies to measure level and the interface between two liquids.
Endress+Hauser EngyCal RH33 Btu and RS33 steam billing meters
14 July, 2011 | Endress+Hauser Australia Pty Ltd
The EngyCal RH33 Btu meter and RS33 steam meter provide high-precision data recording and billing information for custody transfer, steam measurement and energy-flow calculations for process and facility applications.
Banner Engineering SureCross Industrial Wireless I/O Network brochure
14 July, 2011 | Micromax Pty Ltd
The Banner Engineering SureCross Industrial Wireless I/O Network brochure is now available in both a print and an interactive version. The brochure provides comprehensive information on a new line of SureCross 1 W radios. These new radios offer increased I/O counts to accommodate most application requirements, in addition to a higher-powered radio transmitter to increase the range of wireless networks.
Fluke P3 Series thermal imagers
14 July, 2011 | Fluke Australia Pty Ltd
Based on the Fluke Ti32, the P3 Series thermal imagers add four additional products.
Dytran Instruments 3274A series piezoelectric accelerometers
14 July, 2011 | Metromatics Pty Ltd
The 3274A series miniature, low-profile, IEPE piezoelectric accelerometers are designed to mount in spaces typically inaccessible to other types of accelerometers.
Exlar PRS and PRR planetary roller screws
13 July, 2011 | Applied Automation
Exlar’s component planetary roller screw line has been expanded to include two performance capacities, available in PRS and PRR models. The PRS models, with G5 lead accuracy, are available in screw diameters ranging from 8-80 mm and deliver static load ratings up to 970 kN. Exlar’s PRR models, with G9 lead accuracy, are available in screw diameters of 12 to 27 mm and offer static loads up to 80 kN.
Superior Pump Technologies range of F&B pumping solutions
13 July, 2011 | Superior Pump Technologies
Superior Pump Technologies specialises in supplying pumping equipment to the food industry, as well as oil and gas, water and wastewater and pharmaceutical users. The company designs and builds pump units tailored to specific users’ requirements.
Pepperl+Fuchs UMC3000 ultrasonic washdown sensors
13 July, 2011 | Pepperl+Fuchs (Aust) Pty Ltd
The UMC3000 ultrasonic sensor has a seamless, 100% stainless steel housing and chemically resistant cable system to enable ultrasonic monitoring and control in areas previously considered impossible.
Swagelok RHPS Series TBRS and TBVS low-pressure gas regulators
12 July, 2011 | Swagelok Corporation
Swagelok RHPS Series TBRS and TBVS model regulators are designed to provide accurate pressure control in low-pressure gas systems. One common application is accurate control of a blanketing (inert) gas in a closed tank or vessel. Installed on a tank’s inlet and outlet, the TBRS (inlet) and TBVS (outlet) regulators maintain a tank’s blanketing gas at a constant pressure.
ifm efector LMT Series level sensor
12 July, 2011 | ifm efector pty ltd
The LMT Series level sensor can be used as a suitable alternative to tuning-fork level sensors that are prone to false signalling.
Hydac test gauge kits
12 July, 2011 | HYDAC International
Available with one, two or three gauges, the Hydac test gauge kits offer accurate, precise and efficient pressure control and monitoring for hydraulic systems, while eliminating the risk of introducing contamination.
Rockwell Automation safety relays
11 July, 2011 | Rockwell Automation Australia
Rockwell Automation is introducing a new generation of safety relays that will be designed to address the majority of safety-related applications. Existing Allen-Bradley Guardmaster safety relays will not become obsolete, but customers who wish to simplify their inventory and usage will have the choice of a smaller family of safety relays.
Fluke 810 vibration tester
11 July, 2011 | Fluke Australia Pty Ltd
The Fluke 810 vibration tester is designed to enable maintenance teams to rapidly collect data and diagnose and solve mechanical problems with an easy-to-use tool. It is designed and programmed to diagnose the most common mechanical problems of unbalance, looseness, misalignment and bearing failures in a wide variety of mechanical equipment, including motors, fans, blowers, belts and chain drives, gearboxes, couplings, pumps, compressors, closed coupled machines and spindles.
Rockwell Automation FactoryTalk Batch version 11
10 July, 2011 | Rockwell Automation Australia
The application development capabilities of FactoryTalk Batch software have been expanded to help users design and run batch applications more rapidly. Version 11 features intelligent recipe capabilities, secure operator overrides, expanded data collection and reporting and improved material management capabilities.
