Products

Posital magnetic absolute non-contact encoder

14 September, 2012 | Plant Control & Automation

Posital has released its robust non-contact encoder to replace geared potentiometers. The devices are contact-free recording instruments for angular position and revolution. The encoders have a diameter of 36.5 mm and are available as solid and hollow-shaft versions with industrial analog interfaces that provide current (4-20 mA) and voltage (0-10 V) output. The diagnostic yellow and green LED lights as well as the push-buttons on the encoder make it easy to install and scale.

Endress+Hauser Liquiline CM444 and CM448 multichannel analytical transmitters

14 September, 2012 | Endress+Hauser Australia Pty Ltd

Liquiline CM444 and CM448 multichannel analytical transmitters have a rugged plastic leak-proof, corrosion-resistant housing, suitable for water, oil, gas, chemical and power industries.

Festo OGGB low-contact gripper

14 September, 2012 | Festo Pty Ltd

The OGGB low-contact gripper, which works on the Bernoulli principle, is an alternative to suction cups.

Moxa DA-685 19″ 2U rackmount computer

13 September, 2012 | Madison Technologies

The DA-685 series computers feature the Intel Atom D510 processor, a fanless design, PTP v2 and EMC Level 4 certification.

ORing IPS-3082GC-24V managed industrial ethernet switch

13 September, 2012 | ICP Electronics Australia

The IPS-3082GC-24V supports ethernet redundancy protocols, ORing and O-Chain, with recovery time of less than 10 ms with up to 250 nodes.

Nexen harmonic gearhead

12 September, 2012 | Norman G Clark Pty Ltd

The Nexen compact harmonic gearhead directly replaces much larger, high-ratio planetary gearheads utilising the latest harmonic, strain wave gearing technology.

Adlink Technology PCI-8254/PCI-8258 advanced motion controller

11 September, 2012 | ADLINK Technology Inc

The PCI-8254/PCI-8258 advanced motion controllers provide servo updates up to 20 kHz through a hardware-based PID-FF control loop and second-order filters.

Furness FC770 leak detector

11 September, 2012 | Bestech Australia Pty Ltd

The FCO770 leak tester can be set up to test with vacuum or positive pressure. The maximum negative pressure range is -100 kPa (0 kPa absolute) and the maximum positive pressure range is 3 MPa (30 bar).

Martel BetaGauge 311A-EX and 321A-EX pressure calibrators for hazardous areas

07 September, 2012 | Zedflo Australia

The Martel BetaGauge 311A-EX (single-sensor) and 321A-EX (dual-sensor) pressure calibrators have hazardous area approvals that include IECEx and ATEX certification for worldwide use.

Banner Engineering SureCross Q45 self-contained, wireless photoelectric sensor solution

06 September, 2012 | Micromax Pty Ltd

The SureCross Q45 provides a turnkey wireless photoelectric solution with extended battery life up to five years on two AA lithium batteries.

Bronkhorst Cori-Tech mini Cori-Flow Coriolis mass flow meter for low flows

06 September, 2012 | Anri Instruments & Controls Pty Ltd

The mini Cori-Flow compact flow meters are now available with IECEx and ATEX approval II 2G Ex d IIB T6 for use in hazardous areas.

tna robagFXIS 3ci Series PE packaging system

05 September, 2012 | TNA Solutions Pty Ltd

The robagFXI 3ci Series features a rotary impulse sealing jaw system for the efficient packaging of fresh or frozen vegetables, salads and ready-to-eat fruit at bagging speeds of up to 150 bpm.

Michell Instruments Transportable Condumax II hydrocarbon dewpoint analyser

05 September, 2012 | AMS Instrumentation & Calibration Pty Ltd

The Transportable Condumax II measures hydrocarbon and water dewpoint (key indicators of the quality of natural gas) and is fitted into a robust transport case.

Sierra Instruments InnovaMass 240 cryogenic multivariable vortex mass flowmeter

05 September, 2012 | Procon Instrument Technology

The cryogenic version of the InnovaMass 240 multivariable mass vortex flowmeter is designed for measuring liquefied gases at temperatures down to -200°C.

Moore Industries SRM Safety Relay Module

04 September, 2012 | Moore Industries

The SRM Safety Relay Module from Moore Industries is a versatile relay repeater module that has been certified by exida for single use in Safety Instrumented Systems up to SIL2.

  • All content Copyright © 2025 Westwick-Farrow Pty Ltd