ICP DAS ET-2260 IP-based Ethernet I/O monitoring and control module

Wednesday, 24 February, 2016 | Supplied by: ICP Electronics Australia Pty Ltd



Providing a variety of digital I/O functions, the ICP DAS ET-2260 is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 Mbps Ethernet network by using the Modbus TCP/UDP protocol, making the ET-2260 module easy to integrate within HMI, SCADA and PLC-based systems.

The ET-2260 provides six wet contact digital input channels and six Form A electromechanical relays. With two Ethernet ports, the ET-2260 allows for daisy-chain connections, enabling flexibility in locating devices, easy installation and lower infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge protection and 3000 VDC I/O isolation to enhance noise protection capabilities in industrial environments. Each input channel can be used as a 32-bit counter. The power-on value and safe value of the relays are configurable.

The module can be used to create DI to DO pair connection through Ethernet. After configuration, the ET-2260 module can continuously poll the status of the local DI channels and then write to the remote DO devices via the Modbus/TCP protocol.

It is equipped with removable terminal block connector for easy wiring in industrial applications and features a powerful 32-bit ARM MCU. Operating temperature range is -25 to +75°C.

Online: www.icp-australia.com.au
Phone: 02 9457 6011
Related Products

Red Lion FlexEdge Intelligent Edge Automation Platform

The FlexEdge Intelligent Edge Automation Platform features a modular design to enable quick...

Hirschmann EAGLE40 industrial firewall

Belden has released its latest Hirschmann EAGLE industrial firewall to meet the evolving...

Red Lion NT328G Layer 3 Ethernet switch

Red Lion has released the NT328G Layer 3 Ethernet switch offering 28 high-speed ports.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd