ICP DAS I-8123W-CPS single-port CANopen slave module
The ICP DAS I-8123W-CPS is a single-port CANopen slave module. As a stand-alone CAN controller, the module can represent an economic solution for CANopen applications and be a CANopen slave device on a CANopen network.
The module has one independent CAN communication port with a 5-pin screw terminal connector, and has the ability to cover a wide range of CANopen applications. The module uses the Phillips SJA1000T and transceiver 82C250, which provide both CAN 2.0A and 2.0B specific, retransmission functionality, bus arbitration and error detection with auto correction.
It can be installed in the WinPACs, ViewPACs and XPACs Series. It is suitable for applications in the industrial automation, building automation, vehicle applications and embedded control networks.
Phone: 02 9457 6011
ifm AL1602 IO-Link master
The AL1602 IO-Link master from ifm offers eight IO-Link ports (Class A/B) with a total of 16...
Ixxat CAN@net Basic CAN-to-Ethernet gateway
The Ixxat CAN@net Basic CAN-FD-to-Ethernet gateway uses UDP/IP communication to reduce protocol...
ProSoft Technology ELX3 ProLinx edge gateway
The ELX3 ProLinx edge gateway is designed to unite OT protocol conversion with lightweight,...
