Dytran series 2006 pressure sensor

Friday, 13 September, 2019 | Supplied by: Metromatics Pty Ltd

The Dytran series 2006 is an ATEX-certified IEPE pressure sensor with a sensitivity of 10 mV/psi, designed to measure dynamic pressure phenomena in the 50–500 psi range at frequencies of up to 50 kHz. Design of the series incorporates a quartz sensing element operating in compression mode, packaged in a rugged stainless steel housing, with a robust 2-pin MIL-C-5015 axial connector and a ¼-18 NPT pipe thread mount.

The sensor is acceleration compensated to minimise the effects of vibration on the output signal and is hermetically sealed for operation in high-humidity and dirty environments. Units are also case isolated to avoid EMI/ground loop interference.

Applications for this series of sensors include industrial acoustic studies, industrial pressure pulsations, pipeline leak detection and other general-purpose pressure monitoring.

Online: www.metromatics.com.au
Phone: 07 3868 4255
Related Products

Balluff BML absolute magnetic encoder

The BML absolute magnetic encoder is designed for any application where high absolute accuracy of...

OnRobot Gecko SP adhesive gripper

The Gecko SP is a compact, single-pad version of the Gecko no-mark adhesive gripper.

SMC LE series motorless electric actuators

The LE series of motorless electric actuators is compatible with motors from 16 different...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd